diff --git a/plugins/samplesource/bladerf1input/bladerf1input.cpp b/plugins/samplesource/bladerf1input/bladerf1input.cpp
index f21349624..11bd0392b 100644
--- a/plugins/samplesource/bladerf1input/bladerf1input.cpp
+++ b/plugins/samplesource/bladerf1input/bladerf1input.cpp
@@ -14,11 +14,12 @@
 // along with this program. If not, see <http://www.gnu.org/licenses/>.          //
 ///////////////////////////////////////////////////////////////////////////////////
 
-#include "bladerf1input.h"
-
 #include <string.h>
 #include <errno.h>
+
 #include <QDebug>
+#include <QNetworkReply>
+#include <QBuffer>
 
 #include "SWGDeviceSettings.h"
 #include "SWGDeviceState.h"
@@ -30,6 +31,7 @@
 #include "device/devicesourceapi.h"
 #include "device/devicesinkapi.h"
 
+#include "bladerf1input.h"
 #include "bladerf1inputthread.h"
 
 MESSAGE_CLASS_DEFINITION(Bladerf1Input::MsgConfigureBladerf1, Message)
@@ -49,11 +51,20 @@ Bladerf1Input::Bladerf1Input(DeviceSourceAPI *deviceAPI) :
     m_deviceAPI->addSink(m_fileSink);
 
     m_deviceAPI->setBuddySharedPtr(&m_sharedParams);
+
+    m_networkManager = new QNetworkAccessManager();
+    connect(m_networkManager, SIGNAL(finished(QNetworkReply*)), this, SLOT(networkManagerFinished(QNetworkReply*)));
 }
 
 Bladerf1Input::~Bladerf1Input()
 {
-    if (m_running) stop();
+    disconnect(m_networkManager, SIGNAL(finished(QNetworkReply*)), this, SLOT(networkManagerFinished(QNetworkReply*)));
+    delete m_networkManager;
+
+    if (m_running) {
+        stop();
+    }
+
     m_deviceAPI->removeSink(m_fileSink);
     delete m_fileSink;
     closeDevice();
@@ -311,6 +322,10 @@ bool Bladerf1Input::handleMessage(const Message& message)
             m_deviceAPI->stopAcquisition();
         }
 
+        if (m_settings.m_useReverseAPI) {
+            webapiReverseSendStartStop(cmd.getStartStop());
+        }
+
         return true;
     }
 	else
@@ -322,30 +337,33 @@ bool Bladerf1Input::handleMessage(const Message& message)
 bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool force)
 {
 	bool forwardChange = false;
+    QList<QString> reverseAPIKeys;
 //	QMutexLocker mutexLocker(&m_mutex);
 
 	qDebug() << "BladerfInput::applySettings: m_dev: " << m_dev;
 
+    if ((m_settings.m_dcBlock != settings.m_dcBlock) || force) {
+        reverseAPIKeys.append("dcBlock");
+    }
+    if ((m_settings.m_iqCorrection != settings.m_iqCorrection) || force) {
+        reverseAPIKeys.append("iqCorrection");
+    }
+
 	if ((m_settings.m_dcBlock != settings.m_dcBlock) ||
 	    (m_settings.m_iqCorrection != settings.m_iqCorrection) || force)
 	{
-//		m_settings.m_dcBlock = settings.m_dcBlock;
-//		m_settings.m_iqCorrection = settings.m_iqCorrection;
 		m_deviceAPI->configureCorrections(settings.m_dcBlock, settings.m_iqCorrection);
 	}
 
 	if ((m_settings.m_lnaGain != settings.m_lnaGain) || force)
 	{
-//		m_settings.m_lnaGain = settings.m_lnaGain;
+        reverseAPIKeys.append("lnaGain");
 
 		if (m_dev != 0)
 		{
-			if(bladerf_set_lna_gain(m_dev, getLnaGain(settings.m_lnaGain)) != 0)
-			{
+			if(bladerf_set_lna_gain(m_dev, getLnaGain(settings.m_lnaGain)) != 0) {
 				qDebug("BladerfInput::applySettings: bladerf_set_lna_gain() failed");
-			}
-			else
-			{
+			} else {
 				qDebug() << "BladerfInput::applySettings: LNA gain set to " << getLnaGain(settings.m_lnaGain);
 			}
 		}
@@ -353,16 +371,13 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
 
 	if ((m_settings.m_vga1 != settings.m_vga1) || force)
 	{
-//		m_settings.m_vga1 = settings.m_vga1;
+        reverseAPIKeys.append("vga1");
 
 		if (m_dev != 0)
 		{
-			if(bladerf_set_rxvga1(m_dev, settings.m_vga1) != 0)
-			{
+			if(bladerf_set_rxvga1(m_dev, settings.m_vga1) != 0) {
 				qDebug("BladerfInput::applySettings: bladerf_set_rxvga1() failed");
-			}
-			else
-			{
+			} else {
 				qDebug() << "BladerfInput::applySettings: VGA1 gain set to " << settings.m_vga1;
 			}
 		}
@@ -370,16 +385,13 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
 
 	if ((m_settings.m_vga2 != settings.m_vga2) || force)
 	{
-//		m_settings.m_vga2 = settings.m_vga2;
+        reverseAPIKeys.append("vga2");
 
 		if(m_dev != 0)
 		{
-			if(bladerf_set_rxvga2(m_dev, settings.m_vga2) != 0)
-			{
+			if(bladerf_set_rxvga2(m_dev, settings.m_vga2) != 0) {
 				qDebug("BladerfInput::applySettings: bladerf_set_rxvga2() failed");
-			}
-			else
-			{
+			} else {
 				qDebug() << "BladerfInput::applySettings: VGA2 gain set to " << settings.m_vga2;
 			}
 		}
@@ -387,7 +399,7 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
 
 	if ((m_settings.m_xb200 != settings.m_xb200) || force)
 	{
-//		m_settings.m_xb200 = settings.m_xb200;
+        reverseAPIKeys.append("xb200");
 
 		if (m_dev != 0)
 		{
@@ -397,12 +409,9 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
 		    {
 		        DeviceSinkAPI *buddy = m_deviceAPI->getSinkBuddies()[0];
 
-		        if (buddy->getDeviceSinkEngine()->state() == DSPDeviceSinkEngine::StRunning) // Tx side running
-		        {
+		        if (buddy->getDeviceSinkEngine()->state() == DSPDeviceSinkEngine::StRunning) { // Tx side running
 		            changeSettings = false;
-		        }
-		        else
-		        {
+		        } else {
 		            changeSettings = true;
 		        }
 		    }
@@ -415,23 +424,17 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
 		    {
 	            if (settings.m_xb200)
 	            {
-	                if (bladerf_expansion_attach(m_dev, BLADERF_XB_200) != 0)
-	                {
+	                if (bladerf_expansion_attach(m_dev, BLADERF_XB_200) != 0) {
 	                    qDebug("BladerfInput::applySettings: bladerf_expansion_attach(xb200) failed");
-	                }
-	                else
-	                {
+	                } else {
 	                    qDebug() << "BladerfInput::applySettings: Attach XB200";
 	                }
 	            }
 	            else
 	            {
-	                if (bladerf_expansion_attach(m_dev, BLADERF_XB_NONE) != 0)
-	                {
+	                if (bladerf_expansion_attach(m_dev, BLADERF_XB_NONE) != 0) {
 	                    qDebug("BladerfInput::applySettings: bladerf_expansion_attach(none) failed");
-	                }
-	                else
-	                {
+	                } else {
 	                    qDebug() << "BladerfInput::applySettings: Detach XB200";
 	                }
 	            }
@@ -443,16 +446,13 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
 
 	if ((m_settings.m_xb200Path != settings.m_xb200Path) || force)
 	{
-//		m_settings.m_xb200Path = settings.m_xb200Path;
+        reverseAPIKeys.append("xb200Path");
 
 		if (m_dev != 0)
 		{
-			if(bladerf_xb200_set_path(m_dev, BLADERF_MODULE_RX, settings.m_xb200Path) != 0)
-			{
+			if(bladerf_xb200_set_path(m_dev, BLADERF_MODULE_RX, settings.m_xb200Path) != 0) {
 				qDebug("BladerfInput::applySettings: bladerf_xb200_set_path(BLADERF_MODULE_RX) failed");
-			}
-			else
-			{
+			} else {
 				qDebug() << "BladerfInput::applySettings: set xb200 path to " << settings.m_xb200Path;
 			}
 		}
@@ -460,16 +460,13 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
 
 	if ((m_settings.m_xb200Filter != settings.m_xb200Filter) || force)
 	{
-//		m_settings.m_xb200Filter = settings.m_xb200Filter;
+        reverseAPIKeys.append("xb200Filter");
 
 		if (m_dev != 0)
 		{
-			if(bladerf_xb200_set_filterbank(m_dev, BLADERF_MODULE_RX, settings.m_xb200Filter) != 0)
-			{
+			if(bladerf_xb200_set_filterbank(m_dev, BLADERF_MODULE_RX, settings.m_xb200Filter) != 0) {
 				qDebug("BladerfInput::applySettings: bladerf_xb200_set_filterbank(BLADERF_MODULE_RX) failed");
-			}
-			else
-			{
+			} else {
 				qDebug() << "BladerfInput::applySettings: set xb200 filter to " << settings.m_xb200Filter;
 			}
 		}
@@ -477,19 +474,16 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
 
 	if ((m_settings.m_devSampleRate != settings.m_devSampleRate) || force)
 	{
-//		m_settings.m_devSampleRate = settings.m_devSampleRate;
+        reverseAPIKeys.append("devSampleRate");
 		forwardChange = true;
 
 		if (m_dev != 0)
 		{
 			unsigned int actualSamplerate;
 
-			if (bladerf_set_sample_rate(m_dev, BLADERF_MODULE_RX, settings.m_devSampleRate, &actualSamplerate) < 0)
-			{
+			if (bladerf_set_sample_rate(m_dev, BLADERF_MODULE_RX, settings.m_devSampleRate, &actualSamplerate) < 0) {
 				qCritical("BladerfInput::applySettings: could not set sample rate: %d", settings.m_devSampleRate);
-			}
-			else
-			{
+			} else {
 				qDebug() << "BladerfInput::applySettings: bladerf_set_sample_rate(BLADERF_MODULE_RX) actual sample rate is " << actualSamplerate;
 			}
 		}
@@ -497,18 +491,15 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
 
 	if ((m_settings.m_bandwidth != settings.m_bandwidth) || force)
 	{
-//		m_settings.m_bandwidth = settings.m_bandwidth;
+        reverseAPIKeys.append("bandwidth");
 
 		if(m_dev != 0)
 		{
 			unsigned int actualBandwidth;
 
-			if( bladerf_set_bandwidth(m_dev, BLADERF_MODULE_RX, settings.m_bandwidth, &actualBandwidth) < 0)
-			{
+			if( bladerf_set_bandwidth(m_dev, BLADERF_MODULE_RX, settings.m_bandwidth, &actualBandwidth) < 0) {
 				qCritical("BladerfInput::applySettings: could not set bandwidth: %d", settings.m_bandwidth);
-			}
-			else
-			{
+			} else {
 				qDebug() << "BladerfInput::applySettings: bladerf_set_bandwidth(BLADERF_MODULE_RX) actual bandwidth is " << actualBandwidth;
 			}
 		}
@@ -516,6 +507,8 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
 
 	if ((m_settings.m_fcPos != settings.m_fcPos) || force)
 	{
+        reverseAPIKeys.append("fcPos");
+
 		if (m_bladerfThread != 0)
 		{
 			m_bladerfThread->setFcPos((int) settings.m_fcPos);
@@ -525,7 +518,7 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
 
     if ((m_settings.m_log2Decim != settings.m_log2Decim) || force)
     {
-//        m_settings.m_log2Decim = settings.m_log2Decim;
+        reverseAPIKeys.append("log2Decim");
         forwardChange = true;
 
         if (m_bladerfThread != 0)
@@ -535,6 +528,10 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
         }
     }
 
+    if ((m_settings.m_centerFrequency != settings.m_centerFrequency) || force) {
+        reverseAPIKeys.append("centerFrequency");
+    }
+
     if ((m_settings.m_centerFrequency != settings.m_centerFrequency)
         || (m_settings.m_devSampleRate != settings.m_devSampleRate)
         || (m_settings.m_fcPos != settings.m_fcPos)
@@ -547,10 +544,6 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
                 (DeviceSampleSource::fcPos_t) settings.m_fcPos,
                 settings.m_devSampleRate);
 
-//        m_settings.m_centerFrequency = settings.m_centerFrequency;
-//        m_settings.m_log2Decim = settings.m_log2Decim;
-//        m_settings.m_fcPos = settings.m_fcPos;
-
         forwardChange = true;
 
         if (m_dev != 0)
@@ -571,6 +564,15 @@ bool Bladerf1Input::applySettings(const BladeRF1InputSettings& settings, bool fo
         m_deviceAPI->getDeviceEngineInputMessageQueue()->push(notif);
 	}
 
+    if (settings.m_useReverseAPI)
+    {
+        bool fullUpdate = ((m_settings.m_useReverseAPI != settings.m_useReverseAPI) && settings.m_useReverseAPI) ||
+                (m_settings.m_reverseAPIAddress != settings.m_reverseAPIAddress) ||
+                (m_settings.m_reverseAPIPort != settings.m_reverseAPIPort) ||
+                (m_settings.m_reverseAPIDeviceIndex != settings.m_reverseAPIDeviceIndex);
+        webapiReverseSendSettings(reverseAPIKeys, settings, fullUpdate || force);
+    }
+
 	m_settings = settings;
 
     qDebug() << "BladerfInput::applySettings: "
@@ -733,3 +735,107 @@ int Bladerf1Input::webapiRun(
 
     return 200;
 }
+
+void Bladerf1Input::webapiReverseSendSettings(QList<QString>& deviceSettingsKeys, const BladeRF1InputSettings& settings, bool force)
+{
+    SWGSDRangel::SWGDeviceSettings *swgDeviceSettings = new SWGSDRangel::SWGDeviceSettings();
+    swgDeviceSettings->setTx(0);
+    swgDeviceSettings->setDeviceHwType(new QString("BladeRF1"));
+    swgDeviceSettings->setBladeRf1InputSettings(new SWGSDRangel::SWGBladeRF1InputSettings());
+    SWGSDRangel::SWGBladeRF1InputSettings *swgBladeRF1Settings = swgDeviceSettings->getBladeRf1InputSettings();
+
+    // transfer data that has been modified. When force is on transfer all data except reverse API data
+
+    if (deviceSettingsKeys.contains("centerFrequency") || force) {
+        swgBladeRF1Settings->setCenterFrequency(settings.m_centerFrequency);
+    }
+    if (deviceSettingsKeys.contains("devSampleRate") || force) {
+        swgBladeRF1Settings->setDevSampleRate(settings.m_devSampleRate);
+    }
+    if (deviceSettingsKeys.contains("lnaGain") || force) {
+        swgBladeRF1Settings->setLnaGain(settings.m_lnaGain);
+    }
+    if (deviceSettingsKeys.contains("vga1") || force) {
+        swgBladeRF1Settings->setVga1(settings.m_vga1);
+    }
+    if (deviceSettingsKeys.contains("vga2") || force) {
+        swgBladeRF1Settings->setVga1(settings.m_vga2);
+    }
+    if (deviceSettingsKeys.contains("bandwidth") || force) {
+        swgBladeRF1Settings->setBandwidth(settings.m_bandwidth);
+    }
+    if (deviceSettingsKeys.contains("log2Decim") || force) {
+        swgBladeRF1Settings->setLog2Decim(settings.m_log2Decim);
+    }
+    if (deviceSettingsKeys.contains("fcPos") || force) {
+        swgBladeRF1Settings->setFcPos((int) settings.m_fcPos);
+    }
+    if (deviceSettingsKeys.contains("xb200") || force) {
+        swgBladeRF1Settings->setXb200(settings.m_xb200 ? 1 : 0);
+    }
+    if (deviceSettingsKeys.contains("xb200Path") || force) {
+        swgBladeRF1Settings->setXb200Path((int) settings.m_xb200Path);
+    }
+    if (deviceSettingsKeys.contains("xb200Filter") || force) {
+        swgBladeRF1Settings->setXb200Filter((int) settings.m_xb200Filter);
+    }
+    if (deviceSettingsKeys.contains("dcBlock") || force) {
+        swgBladeRF1Settings->setDcBlock(settings.m_dcBlock ? 1 : 0);
+    }
+    if (deviceSettingsKeys.contains("iqCorrection") || force) {
+        swgBladeRF1Settings->setIqCorrection(settings.m_iqCorrection ? 1 : 0);
+    }
+    if (deviceSettingsKeys.contains("fileRecordName") || force) {
+        swgBladeRF1Settings->setFileRecordName(new QString(settings.m_fileRecordName));
+    }
+
+    QString deviceSettingsURL = QString("http://%1:%2/sdrangel/deviceset/%3/device/settings")
+            .arg(settings.m_reverseAPIAddress)
+            .arg(settings.m_reverseAPIPort)
+            .arg(settings.m_reverseAPIDeviceIndex);
+    m_networkRequest.setUrl(QUrl(deviceSettingsURL));
+    m_networkRequest.setHeader(QNetworkRequest::ContentTypeHeader, "application/json");
+
+    QBuffer *buffer=new QBuffer();
+    buffer->open((QBuffer::ReadWrite));
+    buffer->write(swgDeviceSettings->asJson().toUtf8());
+    buffer->seek(0);
+
+    // Always use PATCH to avoid passing reverse API settings
+    m_networkManager->sendCustomRequest(m_networkRequest, "PATCH", buffer);
+
+    delete swgDeviceSettings;
+}
+
+void Bladerf1Input::webapiReverseSendStartStop(bool start)
+{
+    QString deviceSettingsURL = QString("http://%1:%2/sdrangel/deviceset/%3/device/run")
+            .arg(m_settings.m_reverseAPIAddress)
+            .arg(m_settings.m_reverseAPIPort)
+            .arg(m_settings.m_reverseAPIDeviceIndex);
+    m_networkRequest.setUrl(QUrl(deviceSettingsURL));
+
+    if (start) {
+        m_networkManager->sendCustomRequest(m_networkRequest, "POST");
+    } else {
+        m_networkManager->sendCustomRequest(m_networkRequest, "DELETE");
+    }
+}
+
+void Bladerf1Input::networkManagerFinished(QNetworkReply *reply)
+{
+    QNetworkReply::NetworkError replyError = reply->error();
+
+    if (replyError)
+    {
+        qWarning() << "Bladerf1Input::networkManagerFinished:"
+                << " error(" << (int) replyError
+                << "): " << replyError
+                << ": " << reply->errorString();
+        return;
+    }
+
+    QString answer = reply->readAll();
+    answer.chop(1); // remove last \n
+    qDebug("Bladerf1Input::networkManagerFinished: reply:\n%s", answer.toStdString().c_str());
+}
diff --git a/plugins/samplesource/bladerf1input/bladerf1input.h b/plugins/samplesource/bladerf1input/bladerf1input.h
index 19b8feefb..ec3265c4f 100644
--- a/plugins/samplesource/bladerf1input/bladerf1input.h
+++ b/plugins/samplesource/bladerf1input/bladerf1input.h
@@ -19,6 +19,7 @@
 
 #include <QString>
 #include <QByteArray>
+#include <QNetworkRequest>
 
 #include <libbladeRF.h>
 #include <dsp/devicesamplesource.h>
@@ -27,11 +28,14 @@
 #include "../../../devices/bladerf1/devicebladerf1param.h"
 #include "bladerf1inputsettings.h"
 
+class QNetworkAccessManager;
+class QNetworkReply;
 class DeviceSourceAPI;
 class Bladerf1InputThread;
 class FileRecord;
 
 class Bladerf1Input : public DeviceSampleSource {
+    Q_OBJECT
 public:
 	class MsgConfigureBladerf1 : public Message {
 		MESSAGE_CLASS_DECLARATION
@@ -133,12 +137,6 @@ public:
             QString& errorMessage);
 
 private:
-    bool openDevice();
-    void closeDevice();
-	bool applySettings(const BladeRF1InputSettings& settings, bool force);
-	bladerf_lna_gain getLnaGain(int lnaGain);
-    void webapiFormatDeviceSettings(SWGSDRangel::SWGDeviceSettings& response, const BladeRF1InputSettings& settings);
-
 	DeviceSourceAPI *m_deviceAPI;
 	QMutex m_mutex;
 	BladeRF1InputSettings m_settings;
@@ -148,6 +146,19 @@ private:
 	DeviceBladeRF1Params m_sharedParams;
 	bool m_running;
     FileRecord *m_fileSink; //!< File sink to record device I/Q output
+    QNetworkAccessManager *m_networkManager;
+    QNetworkRequest m_networkRequest;
+
+    bool openDevice();
+    void closeDevice();
+	bool applySettings(const BladeRF1InputSettings& settings, bool force);
+	bladerf_lna_gain getLnaGain(int lnaGain);
+    void webapiFormatDeviceSettings(SWGSDRangel::SWGDeviceSettings& response, const BladeRF1InputSettings& settings);
+    void webapiReverseSendSettings(QList<QString>& deviceSettingsKeys, const BladeRF1InputSettings& settings, bool force);
+    void webapiReverseSendStartStop(bool start);
+
+private slots:
+    void networkManagerFinished(QNetworkReply *reply);
 };
 
 #endif // INCLUDE_BLADERFINPUT_H
diff --git a/plugins/samplesource/bladerf1input/bladerf1inputgui.cpp b/plugins/samplesource/bladerf1input/bladerf1inputgui.cpp
index 3978c3f6e..a627961ec 100644
--- a/plugins/samplesource/bladerf1input/bladerf1inputgui.cpp
+++ b/plugins/samplesource/bladerf1input/bladerf1inputgui.cpp
@@ -22,6 +22,8 @@
 #include "ui_bladerf1inputgui.h"
 #include "gui/colormapper.h"
 #include "gui/glspectrum.h"
+#include "gui/crightclickenabler.h"
+#include "gui/basicdevicesettingsdialog.h"
 #include "dsp/dspengine.h"
 #include "dsp/dspcommands.h"
 #include "device/devicesourceapi.h"
@@ -60,6 +62,9 @@ Bladerf1InputGui::Bladerf1InputGui(DeviceUISet *deviceUISet, QWidget* parent) :
 	connect(&m_statusTimer, SIGNAL(timeout()), this, SLOT(updateStatus()));
 	m_statusTimer.start(500);
 
+    CRightClickEnabler *startStopRightClickEnabler = new CRightClickEnabler(ui->startStop);
+    connect(startStopRightClickEnabler, SIGNAL(rightClick(const QPoint &)), this, SLOT(openDeviceSettingsDialog(const QPoint &)));
+
 	displaySettings();
 
 	connect(&m_inputMessageQueue, SIGNAL(messageEnqueued()), this, SLOT(handleInputMessages()), Qt::QueuedConnection);
@@ -475,3 +480,21 @@ unsigned int Bladerf1InputGui::getXb200Index(bool xb_200, bladerf_xb200_path xb2
 	}
 }
 
+void Bladerf1InputGui::openDeviceSettingsDialog(const QPoint& p)
+{
+    BasicDeviceSettingsDialog dialog(this);
+    dialog.setUseReverseAPI(m_settings.m_useReverseAPI);
+    dialog.setReverseAPIAddress(m_settings.m_reverseAPIAddress);
+    dialog.setReverseAPIPort(m_settings.m_reverseAPIPort);
+    dialog.setReverseAPIDeviceIndex(m_settings.m_reverseAPIDeviceIndex);
+
+    dialog.move(p);
+    dialog.exec();
+
+    m_settings.m_useReverseAPI = dialog.useReverseAPI();
+    m_settings.m_reverseAPIAddress = dialog.getReverseAPIAddress();
+    m_settings.m_reverseAPIPort = dialog.getReverseAPIPort();
+    m_settings.m_reverseAPIDeviceIndex = dialog.getReverseAPIDeviceIndex();
+
+    sendSettings();
+}
diff --git a/plugins/samplesource/bladerf1input/bladerf1inputgui.h b/plugins/samplesource/bladerf1input/bladerf1inputgui.h
index c27a8f8cf..156aed389 100644
--- a/plugins/samplesource/bladerf1input/bladerf1inputgui.h
+++ b/plugins/samplesource/bladerf1input/bladerf1inputgui.h
@@ -89,6 +89,7 @@ private slots:
     void on_record_toggled(bool checked);
 	void updateHardware();
 	void updateStatus();
+    void openDeviceSettingsDialog(const QPoint& p);
 };
 
 #endif // INCLUDE_BLADERFINPUTGUI_H
diff --git a/plugins/samplesource/bladerf1input/bladerf1inputplugin.cpp b/plugins/samplesource/bladerf1input/bladerf1inputplugin.cpp
index 6a826eedc..e208439ab 100644
--- a/plugins/samplesource/bladerf1input/bladerf1inputplugin.cpp
+++ b/plugins/samplesource/bladerf1input/bladerf1inputplugin.cpp
@@ -30,7 +30,7 @@
 
 const PluginDescriptor Blderf1InputPlugin::m_pluginDescriptor = {
 	QString("BladeRF1 Input"),
-	QString("4.2.0"),
+	QString("4.3.2"),
 	QString("(c) Edouard Griffiths, F4EXB"),
 	QString("https://github.com/f4exb/sdrangel"),
 	true,
diff --git a/plugins/samplesource/bladerf1input/bladerf1inputsettings.cpp b/plugins/samplesource/bladerf1input/bladerf1inputsettings.cpp
index 922b93c81..336501a93 100644
--- a/plugins/samplesource/bladerf1input/bladerf1inputsettings.cpp
+++ b/plugins/samplesource/bladerf1input/bladerf1inputsettings.cpp
@@ -41,6 +41,10 @@ void BladeRF1InputSettings::resetToDefaults()
 	m_dcBlock = false;
 	m_iqCorrection = false;
 	m_fileRecordName = "";
+    m_useReverseAPI = false;
+    m_reverseAPIAddress = "127.0.0.1";
+    m_reverseAPIPort = 8888;
+    m_reverseAPIDeviceIndex = 0;
 }
 
 QByteArray BladeRF1InputSettings::serialize() const
@@ -59,6 +63,10 @@ QByteArray BladeRF1InputSettings::serialize() const
 	s.writeS32(10, (int) m_xb200Filter);
 	s.writeBool(11, m_dcBlock);
 	s.writeBool(12, m_iqCorrection);
+    s.writeBool(13, m_useReverseAPI);
+    s.writeString(14, m_reverseAPIAddress);
+    s.writeU32(15, m_reverseAPIPort);
+    s.writeU32(16, m_reverseAPIDeviceIndex);
 
 	return s.final();
 }
@@ -76,6 +84,7 @@ bool BladeRF1InputSettings::deserialize(const QByteArray& data)
 	if (d.getVersion() == 1)
 	{
 		int intval;
+		uint32_t uintval;
 
         d.readS32(1, &m_devSampleRate, 3072000);
 		d.readS32(2, &m_lnaGain);
@@ -92,6 +101,18 @@ bool BladeRF1InputSettings::deserialize(const QByteArray& data)
 		m_xb200Filter = (bladerf_xb200_filter) intval;
 		d.readBool(11, &m_dcBlock);
 		d.readBool(12, &m_iqCorrection);
+        d.readBool(13, &m_useReverseAPI, false);
+        d.readString(14, &m_reverseAPIAddress, "127.0.0.1");
+        d.readU32(15, &uintval, 0);
+
+        if ((uintval > 1023) && (uintval < 65535)) {
+            m_reverseAPIPort = uintval;
+        } else {
+            m_reverseAPIPort = 8888;
+        }
+
+        d.readU32(16, &uintval, 0);
+        m_reverseAPIDeviceIndex = uintval > 99 ? 99 : uintval;
 
 		return true;
 	}
diff --git a/plugins/samplesource/bladerf1input/bladerf1inputsettings.h b/plugins/samplesource/bladerf1input/bladerf1inputsettings.h
index ddaf11b6f..850ab4261 100644
--- a/plugins/samplesource/bladerf1input/bladerf1inputsettings.h
+++ b/plugins/samplesource/bladerf1input/bladerf1inputsettings.h
@@ -42,6 +42,10 @@ struct BladeRF1InputSettings {
 	bool m_dcBlock;
 	bool m_iqCorrection;
 	QString m_fileRecordName;
+    bool     m_useReverseAPI;
+    QString  m_reverseAPIAddress;
+    uint16_t m_reverseAPIPort;
+    uint16_t m_reverseAPIDeviceIndex;
 
 	BladeRF1InputSettings();
 	void resetToDefaults();
diff --git a/plugins/samplesource/bladerf2input/bladerf2input.cpp b/plugins/samplesource/bladerf2input/bladerf2input.cpp
index 2f3faa600..175afea03 100644
--- a/plugins/samplesource/bladerf2input/bladerf2input.cpp
+++ b/plugins/samplesource/bladerf2input/bladerf2input.cpp
@@ -15,6 +15,8 @@
 ///////////////////////////////////////////////////////////////////////////////////
 
 #include <QDebug>
+#include <QNetworkReply>
+#include <QBuffer>
 
 #include "libbladeRF.h"
 
@@ -65,10 +67,15 @@ BladeRF2Input::BladeRF2Input(DeviceSourceAPI *deviceAPI) :
 
     m_fileSink = new FileRecord(QString("test_%1.sdriq").arg(m_deviceAPI->getDeviceUID()));
     m_deviceAPI->addSink(m_fileSink);
+    m_networkManager = new QNetworkAccessManager();
+    connect(m_networkManager, SIGNAL(finished(QNetworkReply*)), this, SLOT(networkManagerFinished(QNetworkReply*)));
 }
 
 BladeRF2Input::~BladeRF2Input()
 {
+    disconnect(m_networkManager, SIGNAL(finished(QNetworkReply*)), this, SLOT(networkManagerFinished(QNetworkReply*)));
+    delete m_networkManager;
+
     if (m_running) {
         stop();
     }
@@ -743,6 +750,10 @@ bool BladeRF2Input::handleMessage(const Message& message)
             m_deviceAPI->stopAcquisition();
         }
 
+        if (m_settings.m_useReverseAPI) {
+            webapiReverseSendStartStop(cmd.getStartStop());
+        }
+
         return true;
     }
     else
@@ -762,6 +773,14 @@ bool BladeRF2Input::applySettings(const BladeRF2InputSettings& settings, bool fo
     qint64 xlatedDeviceCenterFrequency = settings.m_centerFrequency;
     xlatedDeviceCenterFrequency -= settings.m_transverterMode ? settings.m_transverterDeltaFrequency : 0;
     xlatedDeviceCenterFrequency = xlatedDeviceCenterFrequency < 0 ? 0 : xlatedDeviceCenterFrequency;
+    QList<QString> reverseAPIKeys;
+
+    if ((m_settings.m_dcBlock != settings.m_dcBlock) || force) {
+        reverseAPIKeys.append("dcBlock");
+    }
+    if ((m_settings.m_iqCorrection != settings.m_iqCorrection) || force) {
+        reverseAPIKeys.append("iqCorrection");
+    }
 
     if ((m_settings.m_dcBlock != settings.m_dcBlock) ||
         (m_settings.m_iqCorrection != settings.m_iqCorrection) || force)
@@ -771,6 +790,7 @@ bool BladeRF2Input::applySettings(const BladeRF2InputSettings& settings, bool fo
 
     if ((m_settings.m_devSampleRate != settings.m_devSampleRate) || force)
     {
+        reverseAPIKeys.append("devSampleRate");
         forwardChangeOwnDSP = true;
         forwardChangeRxBuddies = true;
         forwardChangeTxBuddies = true;
@@ -794,6 +814,7 @@ bool BladeRF2Input::applySettings(const BladeRF2InputSettings& settings, bool fo
 
     if ((m_settings.m_bandwidth != settings.m_bandwidth) || force)
     {
+        reverseAPIKeys.append("bandwidth");
         forwardChangeRxBuddies = true;
 
         if (dev != 0)
@@ -815,6 +836,7 @@ bool BladeRF2Input::applySettings(const BladeRF2InputSettings& settings, bool fo
 
     if ((m_settings.m_fcPos != settings.m_fcPos) || force)
     {
+        reverseAPIKeys.append("fcPos");
         BladeRF2InputThread *inputThread = findThread();
 
         if (inputThread != 0)
@@ -826,6 +848,7 @@ bool BladeRF2Input::applySettings(const BladeRF2InputSettings& settings, bool fo
 
     if ((m_settings.m_log2Decim != settings.m_log2Decim) || force)
     {
+        reverseAPIKeys.append("log2Decim");
         forwardChangeOwnDSP = true;
         BladeRF2InputThread *inputThread = findThread();
 
@@ -836,6 +859,22 @@ bool BladeRF2Input::applySettings(const BladeRF2InputSettings& settings, bool fo
         }
     }
 
+    if ((m_settings.m_centerFrequency != settings.m_centerFrequency) || force) {
+        reverseAPIKeys.append("centerFrequency");
+    }
+    if ((m_settings.m_transverterMode != settings.m_transverterMode) || force) {
+        reverseAPIKeys.append("transverterMode");
+    }
+    if ((m_settings.m_transverterDeltaFrequency != settings.m_transverterDeltaFrequency) || force) {
+        reverseAPIKeys.append("transverterDeltaFrequency");
+    }
+    if ((m_settings.m_LOppmTenths != settings.m_LOppmTenths) || force) {
+        reverseAPIKeys.append("LOppmTenths");
+    }
+    if ((m_settings.m_devSampleRate != settings.m_devSampleRate) || force) {
+        reverseAPIKeys.append("devSampleRate");
+    }
+
     if ((m_settings.m_centerFrequency != settings.m_centerFrequency)
         || (m_settings.m_transverterMode != settings.m_transverterMode)
         || (m_settings.m_transverterDeltaFrequency != settings.m_transverterDeltaFrequency)
@@ -871,12 +910,14 @@ bool BladeRF2Input::applySettings(const BladeRF2InputSettings& settings, bool fo
 
     if ((m_settings.m_biasTee != settings.m_biasTee) || force)
     {
+        reverseAPIKeys.append("biasTee");
         forwardChangeRxBuddies = true;
         m_deviceShared.m_dev->setBiasTeeRx(settings.m_biasTee);
     }
 
     if ((m_settings.m_gainMode != settings.m_gainMode) || force)
     {
+        reverseAPIKeys.append("gainMode");
         forwardChangeRxBuddies = true;
 
         if (dev)
@@ -892,6 +933,13 @@ bool BladeRF2Input::applySettings(const BladeRF2InputSettings& settings, bool fo
         }
     }
 
+    if ((m_settings.m_globalGain != settings.m_globalGain) || force) {
+        reverseAPIKeys.append("globalGain");
+    }
+    if ((m_settings.m_gainMode != settings.m_gainMode) || force) {
+        reverseAPIKeys.append("gainMode");
+    }
+
     if ((m_settings.m_globalGain != settings.m_globalGain)
        || ((m_settings.m_gainMode != settings.m_gainMode) && (settings.m_gainMode == BLADERF_GAIN_MANUAL)) || force)
     {
@@ -955,6 +1003,15 @@ bool BladeRF2Input::applySettings(const BladeRF2InputSettings& settings, bool fo
         }
     }
 
+    if (settings.m_useReverseAPI)
+    {
+        bool fullUpdate = ((m_settings.m_useReverseAPI != settings.m_useReverseAPI) && settings.m_useReverseAPI) ||
+                (m_settings.m_reverseAPIAddress != settings.m_reverseAPIAddress) ||
+                (m_settings.m_reverseAPIPort != settings.m_reverseAPIPort) ||
+                (m_settings.m_reverseAPIDeviceIndex != settings.m_reverseAPIDeviceIndex);
+        webapiReverseSendSettings(reverseAPIKeys, settings, fullUpdate || force);
+    }
+
     m_settings = settings;
 
     qDebug() << "BladeRF2Input::applySettings: "
@@ -1161,3 +1218,107 @@ int BladeRF2Input::webapiRun(
 
     return 200;
 }
+
+void BladeRF2Input::webapiReverseSendSettings(QList<QString>& deviceSettingsKeys, const BladeRF2InputSettings& settings, bool force)
+{
+    SWGSDRangel::SWGDeviceSettings *swgDeviceSettings = new SWGSDRangel::SWGDeviceSettings();
+    swgDeviceSettings->setTx(0);
+    swgDeviceSettings->setDeviceHwType(new QString("BladeRF2"));
+    swgDeviceSettings->setBladeRf2InputSettings(new SWGSDRangel::SWGBladeRF2InputSettings());
+    SWGSDRangel::SWGBladeRF2InputSettings *swgBladeRF2Settings = swgDeviceSettings->getBladeRf2InputSettings();
+
+    // transfer data that has been modified. When force is on transfer all data except reverse API data
+
+    if (deviceSettingsKeys.contains("centerFrequency") || force) {
+        swgBladeRF2Settings->setCenterFrequency(settings.m_centerFrequency);
+    }
+    if (deviceSettingsKeys.contains("LOppmTenths") || force) {
+        swgBladeRF2Settings->setLOppmTenths(settings.m_LOppmTenths);
+    }
+    if (deviceSettingsKeys.contains("log2Decim") || force) {
+        swgBladeRF2Settings->setLog2Decim(settings.m_log2Decim);
+    }
+    if (deviceSettingsKeys.contains("fcPos") || force) {
+        swgBladeRF2Settings->setFcPos((int) settings.m_fcPos);
+    }
+    if (deviceSettingsKeys.contains("dcBlock") || force) {
+        swgBladeRF2Settings->setDcBlock(settings.m_dcBlock ? 1 : 0);
+    }
+    if (deviceSettingsKeys.contains("iqCorrection") || force) {
+        swgBladeRF2Settings->setIqCorrection(settings.m_iqCorrection ? 1 : 0);
+    }
+    if (deviceSettingsKeys.contains("transverterDeltaFrequency") || force) {
+        swgBladeRF2Settings->setTransverterDeltaFrequency(settings.m_transverterDeltaFrequency);
+    }
+    if (deviceSettingsKeys.contains("transverterMode") || force) {
+        swgBladeRF2Settings->setTransverterMode(settings.m_transverterMode ? 1 : 0);
+    }
+    if (deviceSettingsKeys.contains("fileRecordName") || force) {
+        swgBladeRF2Settings->setFileRecordName(new QString(settings.m_fileRecordName));
+    }
+    if (deviceSettingsKeys.contains("devSampleRate")) {
+        swgBladeRF2Settings->setDevSampleRate(settings.m_devSampleRate);
+    }
+    if (deviceSettingsKeys.contains("bandwidth")) {
+        swgBladeRF2Settings->setBandwidth(settings.m_bandwidth);
+    }
+    if (deviceSettingsKeys.contains("biasTee")) {
+        swgBladeRF2Settings->setBiasTee(settings.m_biasTee);
+    }
+    if (deviceSettingsKeys.contains("gainMode")) {
+        swgBladeRF2Settings->setGainMode(settings.m_gainMode);
+    }
+    if (deviceSettingsKeys.contains("globalGain")) {
+        swgBladeRF2Settings->setGlobalGain(settings.m_globalGain);
+    }
+
+    QString deviceSettingsURL = QString("http://%1:%2/sdrangel/deviceset/%3/device/settings")
+            .arg(settings.m_reverseAPIAddress)
+            .arg(settings.m_reverseAPIPort)
+            .arg(settings.m_reverseAPIDeviceIndex);
+    m_networkRequest.setUrl(QUrl(deviceSettingsURL));
+    m_networkRequest.setHeader(QNetworkRequest::ContentTypeHeader, "application/json");
+
+    QBuffer *buffer=new QBuffer();
+    buffer->open((QBuffer::ReadWrite));
+    buffer->write(swgDeviceSettings->asJson().toUtf8());
+    buffer->seek(0);
+
+    // Always use PATCH to avoid passing reverse API settings
+    m_networkManager->sendCustomRequest(m_networkRequest, "PATCH", buffer);
+
+    delete swgDeviceSettings;
+}
+
+void BladeRF2Input::webapiReverseSendStartStop(bool start)
+{
+    QString deviceSettingsURL = QString("http://%1:%2/sdrangel/deviceset/%3/device/run")
+            .arg(m_settings.m_reverseAPIAddress)
+            .arg(m_settings.m_reverseAPIPort)
+            .arg(m_settings.m_reverseAPIDeviceIndex);
+    m_networkRequest.setUrl(QUrl(deviceSettingsURL));
+
+    if (start) {
+        m_networkManager->sendCustomRequest(m_networkRequest, "POST");
+    } else {
+        m_networkManager->sendCustomRequest(m_networkRequest, "DELETE");
+    }
+}
+
+void BladeRF2Input::networkManagerFinished(QNetworkReply *reply)
+{
+    QNetworkReply::NetworkError replyError = reply->error();
+
+    if (replyError)
+    {
+        qWarning() << "BladeRF2Input::networkManagerFinished:"
+                << " error(" << (int) replyError
+                << "): " << replyError
+                << ": " << reply->errorString();
+        return;
+    }
+
+    QString answer = reply->readAll();
+    answer.chop(1); // remove last \n
+    qDebug("BladeRF2Input::networkManagerFinished: reply:\n%s", answer.toStdString().c_str());
+}
diff --git a/plugins/samplesource/bladerf2input/bladerf2input.h b/plugins/samplesource/bladerf2input/bladerf2input.h
index 4b9a79561..ea4498c5f 100644
--- a/plugins/samplesource/bladerf2input/bladerf2input.h
+++ b/plugins/samplesource/bladerf2input/bladerf2input.h
@@ -17,22 +17,26 @@
 #ifndef PLUGINS_SAMPLESOURCE_BLADERF2INPUT_BLADERF2INPUT_H_
 #define PLUGINS_SAMPLESOURCE_BLADERF2INPUT_BLADERF2INPUT_H_
 
+#include <stdint.h>
+
 #include <QString>
 #include <QByteArray>
-#include <stdint.h>
+#include <QNetworkRequest>
 
 #include "dsp/devicesamplesource.h"
 #include "bladerf2/devicebladerf2shared.h"
 #include "bladerf2inputsettings.h"
 
+class QNetworkAccessManager;
+class QNetworkReply;
 class DeviceSourceAPI;
 class BladeRF2InputThread;
 class FileRecord;
 struct bladerf_gain_modes;
 struct bladerf;
 
-class BladeRF2Input : public DeviceSampleSource
-{
+class BladeRF2Input : public DeviceSampleSource {
+    Q_OBJECT
 public:
     class MsgConfigureBladeRF2 : public Message {
         MESSAGE_CLASS_DECLARATION
@@ -186,6 +190,8 @@ private:
     BladeRF2InputThread *m_thread;
     FileRecord *m_fileSink; //!< File sink to record device I/Q output
     std::vector<GainMode> m_gainModes;
+    QNetworkAccessManager *m_networkManager;
+    QNetworkRequest m_networkRequest;
 
     bool openDevice();
     void closeDevice();
@@ -195,6 +201,11 @@ private:
     bool setDeviceCenterFrequency(struct bladerf *dev, int requestedChannel, quint64 freq_hz, int loPpmTenths);
     void webapiFormatDeviceSettings(SWGSDRangel::SWGDeviceSettings& response, const BladeRF2InputSettings& settings);
     void webapiFormatDeviceReport(SWGSDRangel::SWGDeviceReport& response);
+    void webapiReverseSendSettings(QList<QString>& deviceSettingsKeys, const BladeRF2InputSettings& settings, bool force);
+    void webapiReverseSendStartStop(bool start);
+
+private slots:
+    void networkManagerFinished(QNetworkReply *reply);
 };
 
 #endif /* PLUGINS_SAMPLESOURCE_BLADERF2INPUT_BLADERF2INPUT_H_ */
diff --git a/plugins/samplesource/bladerf2input/bladerf2inputgui.cpp b/plugins/samplesource/bladerf2input/bladerf2inputgui.cpp
index 02e78775a..e00db93d2 100644
--- a/plugins/samplesource/bladerf2input/bladerf2inputgui.cpp
+++ b/plugins/samplesource/bladerf2input/bladerf2inputgui.cpp
@@ -22,6 +22,8 @@
 #include "ui_bladerf2inputgui.h"
 #include "gui/colormapper.h"
 #include "gui/glspectrum.h"
+#include "gui/crightclickenabler.h"
+#include "gui/basicdevicesettingsdialog.h"
 #include "dsp/dspengine.h"
 #include "dsp/dspcommands.h"
 #include "device/devicesourceapi.h"
@@ -81,6 +83,9 @@ BladeRF2InputGui::BladeRF2InputGui(DeviceUISet *deviceUISet, QWidget* parent) :
     connect(&m_statusTimer, SIGNAL(timeout()), this, SLOT(updateStatus()));
     m_statusTimer.start(500);
 
+    CRightClickEnabler *startStopRightClickEnabler = new CRightClickEnabler(ui->startStop);
+    connect(startStopRightClickEnabler, SIGNAL(rightClick(const QPoint &)), this, SLOT(openDeviceSettingsDialog(const QPoint &)));
+
     displaySettings();
 
     connect(&m_inputMessageQueue, SIGNAL(messageEnqueued()), this, SLOT(handleInputMessages()), Qt::QueuedConnection);
@@ -457,3 +462,22 @@ void BladeRF2InputGui::updateStatus()
         m_lastEngineState = state;
     }
 }
+
+void BladeRF2InputGui::openDeviceSettingsDialog(const QPoint& p)
+{
+    BasicDeviceSettingsDialog dialog(this);
+    dialog.setUseReverseAPI(m_settings.m_useReverseAPI);
+    dialog.setReverseAPIAddress(m_settings.m_reverseAPIAddress);
+    dialog.setReverseAPIPort(m_settings.m_reverseAPIPort);
+    dialog.setReverseAPIDeviceIndex(m_settings.m_reverseAPIDeviceIndex);
+
+    dialog.move(p);
+    dialog.exec();
+
+    m_settings.m_useReverseAPI = dialog.useReverseAPI();
+    m_settings.m_reverseAPIAddress = dialog.getReverseAPIAddress();
+    m_settings.m_reverseAPIPort = dialog.getReverseAPIPort();
+    m_settings.m_reverseAPIDeviceIndex = dialog.getReverseAPIDeviceIndex();
+
+    sendSettings();
+}
diff --git a/plugins/samplesource/bladerf2input/bladerf2inputgui.h b/plugins/samplesource/bladerf2input/bladerf2inputgui.h
index 665670f3d..0b2483793 100644
--- a/plugins/samplesource/bladerf2input/bladerf2inputgui.h
+++ b/plugins/samplesource/bladerf2input/bladerf2inputgui.h
@@ -91,6 +91,7 @@ private slots:
     void on_record_toggled(bool checked);
     void updateHardware();
     void updateStatus();
+    void openDeviceSettingsDialog(const QPoint& p);
 
 };
 
diff --git a/plugins/samplesource/bladerf2input/bladerf2inputplugin.cpp b/plugins/samplesource/bladerf2input/bladerf2inputplugin.cpp
index 2008e9bd7..af26bfb3c 100644
--- a/plugins/samplesource/bladerf2input/bladerf2inputplugin.cpp
+++ b/plugins/samplesource/bladerf2input/bladerf2inputplugin.cpp
@@ -30,7 +30,7 @@
 
 const PluginDescriptor Blderf2InputPlugin::m_pluginDescriptor = {
     QString("BladeRF2 Input"),
-    QString("4.3.0"),
+    QString("4.3.2"),
     QString("(c) Edouard Griffiths, F4EXB"),
     QString("https://github.com/f4exb/sdrangel"),
     true,
diff --git a/plugins/samplesource/bladerf2input/bladerf2inputsettings.cpp b/plugins/samplesource/bladerf2input/bladerf2inputsettings.cpp
index 21e939ff2..597891783 100644
--- a/plugins/samplesource/bladerf2input/bladerf2inputsettings.cpp
+++ b/plugins/samplesource/bladerf2input/bladerf2inputsettings.cpp
@@ -39,6 +39,10 @@ void BladeRF2InputSettings::resetToDefaults()
     m_transverterMode = false;
     m_transverterDeltaFrequency = 0;
     m_fileRecordName = "";
+    m_useReverseAPI = false;
+    m_reverseAPIAddress = "127.0.0.1";
+    m_reverseAPIPort = 8888;
+    m_reverseAPIDeviceIndex = 0;
 }
 
 QByteArray BladeRF2InputSettings::serialize() const
@@ -57,6 +61,10 @@ QByteArray BladeRF2InputSettings::serialize() const
     s.writeS32(10, m_LOppmTenths);
     s.writeBool(11, m_transverterMode);
     s.writeS64(12, m_transverterDeltaFrequency);
+    s.writeBool(13, m_useReverseAPI);
+    s.writeString(14, m_reverseAPIAddress);
+    s.writeU32(15, m_reverseAPIPort);
+    s.writeU32(16, m_reverseAPIDeviceIndex);
 
     return s.final();
 }
@@ -74,6 +82,7 @@ bool BladeRF2InputSettings::deserialize(const QByteArray& data)
     if (d.getVersion() == 1)
     {
         int intval;
+        uint32_t uintval;
 
         d.readS32(1, &m_devSampleRate, 3072000);
         d.readS32(2, &m_bandwidth);
@@ -88,6 +97,18 @@ bool BladeRF2InputSettings::deserialize(const QByteArray& data)
         d.readS32(10, &m_LOppmTenths);
         d.readBool(11, &m_transverterMode, false);
         d.readS64(12, &m_transverterDeltaFrequency, 0);
+        d.readBool(13, &m_useReverseAPI, false);
+        d.readString(14, &m_reverseAPIAddress, "127.0.0.1");
+        d.readU32(15, &uintval, 0);
+
+        if ((uintval > 1023) && (uintval < 65535)) {
+            m_reverseAPIPort = uintval;
+        } else {
+            m_reverseAPIPort = 8888;
+        }
+
+        d.readU32(16, &uintval, 0);
+        m_reverseAPIDeviceIndex = uintval > 99 ? 99 : uintval;
 
         return true;
     }
diff --git a/plugins/samplesource/bladerf2input/bladerf2inputsettings.h b/plugins/samplesource/bladerf2input/bladerf2inputsettings.h
index 722be9e6e..26ad4ca56 100644
--- a/plugins/samplesource/bladerf2input/bladerf2inputsettings.h
+++ b/plugins/samplesource/bladerf2input/bladerf2inputsettings.h
@@ -41,6 +41,10 @@ struct BladeRF2InputSettings {
     bool     m_transverterMode;
     qint64   m_transverterDeltaFrequency;
     QString m_fileRecordName;
+    bool     m_useReverseAPI;
+    QString  m_reverseAPIAddress;
+    uint16_t m_reverseAPIPort;
+    uint16_t m_reverseAPIDeviceIndex;
 
     BladeRF2InputSettings();
     void resetToDefaults();