From 86f08b67bcee918461ca2f657ecd3a8312e895bc Mon Sep 17 00:00:00 2001 From: Bill Somerville Date: Wed, 8 Oct 2014 11:55:08 +0000 Subject: [PATCH] Tidied issue log format git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx-1.4@4492 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 --- issue-log.txt | 454 ++++++++++++++++++++++++++------------------------ 1 file changed, 237 insertions(+), 217 deletions(-) diff --git a/issue-log.txt b/issue-log.txt index 3a6cbf15d..4d673ca16 100644 --- a/issue-log.txt +++ b/issue-log.txt @@ -7,229 +7,237 @@ wsjtx-1.4.0-rc2 Mac installer - g4wjs, Bob n7rjn - Cannot expand archive in RO DMG. - Move tarball to Desktop or somewhere else before expanding. + g4wjs: Move tarball to Desktop or somewhere else before expanding. - Fixed in CMake generated Drag & Drop installer. Closed. + g4wjs: Fixed in CMake generated Drag & Drop installer. Closed. Hamlib TS-2000 - k1jt - WSJT-X "Mode" != "None" glitches when Tx QRG changes - Trying to read "other" VFO mode requires FRn command to "other" - VFO which is source of glitch when split. + g4wjs: Trying to read "other" VFO mode requires FRn command to + other" VFO which is source of glitch when split. - Current best workaround is to set "Mode" to "None" in Settings - which stops WSJT-X trying to manipulate rig mode. + g4wjs: Current best workaround is to set "Mode" to "None" in + Settings which stops WSJT-X trying to manipulate rig mode. - Won't fix - Closed. + g4wjs: Won't fix - Closed. Hamlib FT-847 - Eddy g6uqi - fails to start Hamlib FT-847 - Mark w7mem - fails to start - Sent version with CAT trace - waiting log file. + g4wjs: Sent version with CAT trace - waiting log file. - HamlibTranceiver::init_rig() not coping with no get VFO and no - toggle VFO CAT command available, changed to just assume A/MAIN - is always the Rx VFO on such rigs. + g4wjs: HamlibTranceiver::init_rig() not coping with no get VFO and + no toggle VFO CAT command available, changed to just assume + A/MAIN is always the Rx VFO on such rigs. - Sent g6uqi a test version of RC3 with a fix for this. + g4wjs: Sent g6uqi a test version of RC3 with a fix for this. - g6uqi reposts that this hot fix (r4449) has resolved the issue. + g4wjs: g6uqi reposts that this hot fix (r4449) has resolved the + issue. - Fixed wsjtx/wsjtx-1.4 (r4449) - Closed. + g4wjs: Fixed wsjtx-1.4 (r4449) - Closed. Commander TS-2000 - Jim wb6dkh - SPLIT disappearing Commander TS-2000 - David wd4kpd - possibly the same issue - VOX keying might be the factor. - Sent logs to Dave aa6yq for comment. + g4wjs: VOX keying might be the factor. - Further investigation now points to the auto-atu which swaps - VFO and mode while tuning, this may be confusing Commander. + g4wjs: Sent logs to Dave aa6yq for comment. - Dave aa6yq confirms that WinWarbler will interact with - Commander and cause this issue when the TS-2000 auto-ATU - switches to CW during the tuning sequence. Passed info on to - wb6dkh & wd4kpd. + g4wjs: Further investigation now points to the auto-atu which + swaps VFO and mode while tuning, this may be confusing + Commander. - Not fixed for wd4kpd as he doesn't use WW. Sent tracing RC2 - - awaiting log and match Commander ErrorLog.txt. + g4wjs: Dave aa6yq confirms that WinWarbler will interact with + Commander and cause this issue when the TS-2000 auto-ATU + switches to CW during the tuning sequence. Passed info on + to wb6dkh & wd4kpd. - Logs received from wd4kpd. Unexpected drop out of split - reported by Commander when setting Tx frequency. Forwarded - to aa6yq for analysis. + g4wjs: Not fixed for wd4kpd as he doesn't use WW. Sent tracing RC2 + awaiting log and match Commander ErrorLog.txt. - Dave aa6yq reports that setting Tx frequency clears split on - this rig (I guess many others too that use Kenwood style CAT - commands). He suggests setting Tx frequency before setting - split. This is slightly problematic because setting split - has side effect of setting mode on Tx VFO and on Yaesu and - Elecraft changing from CW to another mode applies a small - frequency offset :( We may have to accept this as it will be - rare and there is no explicit way of setting the mode of the - Tx VFO in the Commander interface. The other workaround of - doing everything twice (TxFreq, Split, TxFreq, Split) will - glitch the Rx or Tx twice as much. + g4wjs: Logs received from wd4kpd. Unexpected drop out of split + reported by Commander when setting Tx frequency. Forwarded + to aa6yq for analysis. - Seems that split needs to be set both before and after every - change of Tx frequency. Before to satisfy rigs like the Icom - IC-756 and after to satisfy rigs like the Kenwood TS-2000. + g4wjs: Dave aa6yq reports that setting Tx frequency clears split + on this rig (I guess many others too that use Kenwood style + CAT commands). He suggests setting Tx frequency before + setting split. This is slightly problematic because setting + split has side effect of setting mode on Tx VFO and on + Yaesu and Elecraft changing from CW to another mode applies + a small frequency offset :( We may have to accept this as + it will be rare and there is no explicit way of setting the + mode of the Tx VFO in the Commander interface. The other + workaround of doing everything twice (TxFreq, Split, + TxFreq, Split) will glitch the Rx or Tx twice as much. - Sent out a test version to wb6dkh, wd4kpd and aa6yq - - awaiting feedback. + g4wjs: Seems that split needs to be set both before and after + every change of Tx frequency. Before to satisfy rigs like + the Icom IC-756 and after to satisfy rigs like the Kenwood + TS-2000. + + g4wjs: Sent out a test version to wb6dkh, wd4kpd and aa6yq - + awaiting feedback. Commander TS-2000 - Jim wb6dkh - Fake split - Leaving wrong QRG (Tx) current. - Need trace for this issue. + g4wjs: Leaving wrong QRG (Tx) current. Need trace for this issue. Flex 6000 (TS-2000 emulation) - George kf2t - fails to read QRG Flex 6700 - Ed k0kc - No CAT no PTT - Flex doesn't have FB; command. + g4wjs: Flex doesn't have FB; command. - Sent kf2t test version that doesn't query TX QRG if not in split. + g4wjs: Sent kf2t test version that doesn't query TX QRG if not in + split. - Sent RC3 preview with a hotfix (r4434) to kf2t & k0kc. + g4wjs: Sent RC3 preview with a hotfix (r4434) to kf2t & k0kc. - Caveats with SmartSDR & FlexRadio SDRs:- + g4wjs: Caveats with SmartSDR & FlexRadio SDRs:- - * Data mode cannot be set from WSJT-X, USB should be OK otherwise - use "None" and set mode manually. + * Data mode cannot be set from WSJT-X, USB should be OK + otherwise use "None" and set mode manually. - * Split operation is not possible, this should not be an issue - given that wide band Tx is available on these radios. + * Split operation is not possible, this should not be an + issue given that wide band Tx is available on these + radios. - Initial reports from kf2t indicate a successful fix. + g4wjs: Initial reports from kf2t indicate a successful fix. - Reported as working as expected by kf2t. + g4wjs: Reported as working as expected by kf2t. Hamlib FlexRadio (DTTSP UDP & IPC interfaces) - - Need to diagnose and check if these work - Hamlib has a FlexRadio back end that talks UDP on 19001 or /dev/shm/SDRcommands . + g4wjs: Hamlib has a FlexRadio back end that talks UDP on 19001 or + /dev/shm/SDRcommands . Windows (Finestra WM) - Josh kk1d - Application not staying inside virtual desktop Hamlib TS-570D - Peter Pauly w0vll - Protocol error while getting TX frequency Hamlib? TS-570 - ??? n4au - Polling causing errors - Split not required so r4434 may have resolved this anyway. + g4wjs: Split not required so r4434 may have resolved this anyway. - Sent trace version of RC2 to Peter. + g4wjs: Sent trace version of RC2 to Peter. - Log shows many corrupt and truncated CAT responses. The - TS-570(D) is known to have fragile CAT handling. I need to look - at hamlib to investigate remedies at the character exchange - level. + g4wjs: Log shows many corrupt and truncated CAT responses. The + TS-570(D) is known to have fragile CAT handling. I need to + look at hamlib to investigate remedies at the character + exchange level. Hamlib FT-450 - Rudy ve3bdr - Protocol error while getting mode of split VFO - May be fixed by r4434. I have asked Rudy to try again with - "Mode" set to "None". + g4wjs: May be fixed by r4434. I have asked Rudy to try again with + Mode" set to "None". - Not fixed. Sent trace version of RC2, awaiting log. + g4wjs: Not fixed. Sent trace version of RC2, awaiting log. LXDE desktop Ubuntu - Craig wb3gck - No application menu bar - Suggested installing or un-installing appmenu-qt5 package. + g4wjs: Suggested installing or un-installing appmenu-qt5 package. - Un-installing appmenu-qt5 resolved this issue. + g4wjs: Un-installing appmenu-qt5 resolved this issue. - Closed. + g4wjs: Closed. Hamlib IC-7100 - Erik on4pb - CAT PTT method not available on IC-7100 - This has been identified as a HamlibTranceiver registration - defect. PTT type categories incorrectly registered. + g4wjs: This has been identified as a HamlibTranceiver registration + defect. PTT type categories incorrectly registered. - Sent hot fix version of RC3 to on4pb for testing. + g4wjs: Sent hot fix version of RC3 to on4pb for testing. - Further problem reported with poll of PTT status failing. This - appears to be a hamlib defect with ptt type being - RIG_PTT_SERIAL_CAT instead of RIG_PTT_RIG. Asked for - clarification on hamlib-devel ML. + g4wjs: Further problem reported with poll of PTT status + failing. This appears to be a hamlib defect with ptt type + being RIG_PTT_SERIAL_CAT instead of RIG_PTT_RIG. Asked for + clarification on hamlib-devel ML. Hamlib IC-746 - Doc kb3mow - Wrong Tx QRG used after dbl-click on decode - Asked for more details of exact Rx/Tx dial QRGs. + g4wjs: Asked for more details of exact Rx/Tx dial QRGs. - Explanation appears to show Tx QRG out by 500Hz. I can't see - any obvious way this can happen. kb3mow has reported that he - can no longer reproduce this issue. + g4wjs: Explanation appears to show Tx QRG out by 500Hz. I can't + see any obvious way this can happen. kb3mow has reported + that he can no longer reproduce this issue. - On Hold. + g4wjs: On Hold. Hamlib ANAN-100D (PowerSDR mRX PS v3.2.19) - Ton pa0tbr - split mode not working Hamlib ANAN-100D (Openhpsdr mRX) - Bob wd6dod - CAT control not working Hamlib hermes (PowerSDR mRX) - Serge r6yy - Cat & PTT not working - Not urgent as split mode not required due to wide band Tx - available. + g4wjs: Not urgent as split mode not required due to wide band Tx + available. - Sent hot fix version of v1.4 with mods for SmartSDR TS-2000 - emulation. + g4wjs: Sent hot fix version of v1.4 with mods for SmartSDR TS-2000 + emulation. - pa0tbr & r6yy report successful operation with patched version. + g4wjs: pa0tbr & r6yy report successful operation with patched + version. - Fixed (mostly) r4434. + g4wjs: Fixed (mostly) r4434. -OmniRig TS-590S - Randy k5rhd - OmniRig server going offline error -OmniRig Omni VII - Bert w0rsb - OmniRig server going offline error + OmniRig TS-590S - Randy k5rhd - OmniRig server going +offline error OmniRig Omni VII - Bert w0rsb - OmniRig server going +offline error - Issues with clearing the error. Probably the "Test CAT" not - always able to start OmniRig client cleanly issue. + g4wjs: Issues with clearing the error. Probably the "Test CAT" + not always able to start OmniRig client cleanly issue. - Sent a tracing version of RC2 - awaiting log. + g4wjs: Sent a tracing version of RC2 - awaiting log. Hamlib R8500 - Chris (UK SWL) airguzzler@btinternet.com - Hamlib IO error - Probably port mis-configuration. Awaiting update. - + g4wjs: Probably port mis-configuration. Awaiting update. CW synthesiser - Jim n4st - Distorted CW Id - Sounds horrible, something is broken in the envelope shaper. + g4wjs: Sounds horrible, something is broken in the envelope shaper. Commander KX3 - Neil kb3tvu - occasionally stuck in TX after normal TX period - Advised to build a CAT trace executable and send log for - analysis - awaiting log. + g4wjs: Advised to build a CAT trace executable and send log for + analysis - awaiting log. - Log is normal with PTT on/off commands being sent to - Commander at the correct times. Asked kb3tvu to reproduce - again with Commander tracing on also - awaiting logs. + g4wjs: Log is normal with PTT on/off commands being sent to + Commander at the correct times. Asked kb3tvu to reproduce + again with Commander tracing on also - awaiting logs. Log files - Wayne m0way - Would like links on desktop to log files - This is probably a good idea, I'm not sure that the desktop is the - best place for them but there must be somewhere sensible and more - visible to put such links. Need to investigate CPack NSIS - generator to find the best way to do this. + g4wjs: This is probably a good idea, I'm not sure that the desktop + is the best place for them but there must be somewhere + sensible and more visible to put such links. Need to + investigate CPack NSIS generator to find the best way to do + this. - A similar feature on Linux/Mac should be possible. + g4wjs: A similar feature on Linux/Mac should be possible. - Proposed for v1.5. + g4wjs: Proposed for v1.5. Waterfall - Jean f8rz - Requesting different labelling - Would like frequency ticks to be at absolute multiples of - 500Hz even when start frequency is not such a multiple. E.g. - for start 200Hz ticks (and labels) at 200, 500, 1000, 1500, - ... + g4wjs: Would like frequency ticks to be at absolute multiples of + 500Hz even when start frequency is not such a + multiple. E.g. for start 200Hz ticks (and labels) at 200, + 500, 1000, 1500, ... - Proposed for v1.5. + g4wjs: Proposed for v1.5. - Implemented by Joe in r4464. (Others please test!) + Implemented by Joe in r4464. (Others please test!) Decoding - Jean f8rz - Abandoned Tx should not disable decoding for a period - This is an outstanding issue in at least v1.3 also. + g4wjs: This is an outstanding issue in at least v1.3 also. - Needs changes to Detector class to allow audio buffers to be - not cleared by transmitting. Complications arise in that any - data from prior receive periods must be cleared. Might be as - simple as clearing the audio buffer after decoding but may be - complicated when decoding overlaps next period. Double - buffering may be an option. Question: is the audio buffer - needed after the last symspec call? + g4wjs: Needs changes to Detector class to allow audio buffers to + be not cleared by transmitting. Complications arise in + that any data from prior receive periods must be cleared. + Might be as simple as clearing the audio buffer after + decoding but may be complicated when decoding overlaps next + period. Double buffering may be an option. Question: is + the audio buffer needed after the last symspec call? K1JT: I agree that this has been a desirable change. Perhaps can zero only a small part of the buffer -- samples taken @@ -237,17 +245,17 @@ Decoding - Jean f8rz - Abandoned Tx should not disable decoding for a period Decoded text - Albert kc8kjf - Report or grid last character truncated - This occurs with larger fonts sizes on long decoded text lines - e.g. two 6 character callsigns and a R+ report or - locator. There is a defect somewhere in the DisplayText class - with font metric calculations. I'm not sure why we even try to - truncate the message text given that it is rendered in a - 
 element and therefore doesn't wrap.
+    g4wjs: This  occurs with larger  fonts sizes on long  decoded text
+    	   lines e.g.   two 6 character  callsigns and a R+  report or
+    	   locator.  There  is a  defect somewhere in  the DisplayText
+    	   class with font  metric calculations.  I'm not  sure why we
+    	   even  try to  truncate the  message text  given that  it is
+    	   rendered in a 
 element and therefore doesn't wrap.
 
-	This  can  be  resolved  by  choosing a  small  font  size  or
-	increasing the main window width a little.
+    g4wjs:  This can  be resolved  by choosing  a small  font size  or
+    	   increasing the main window width a little.
 
-	Proposed for v1.5.
+    g4wjs: Proposed for v1.5.
 
 	K1JT: on the system I tested, it was OK after making the main
 	window a bit wider.  It has something to do with having 
@@ -256,100 +264,106 @@ Decoded text - Albert kc8kjf - Report or grid last character truncated
 
 HRD FTDX3000 - Jean-Michel f6eao/p - Not working
 
-    This as  yet untested  rig with  WSJT-X +  HRD clearly  needs some
-    adjustment to the initialization in the HRDTransceiver class.
+    g4wjs: This  as yet untested rig  with WSJT-X + HRD  clearly needs
+    	   some adjustment to the initialization in the HRDTransceiver
+    	   class.
 
-    Requested the "HRD Interface Information.txt" file for analysis.
+    g4wjs:  Requested the  "HRD  Interface  Information.txt" file  for
+    	   analysis.
 
 Multi-instance support - Bill g4wjs - Lock mechanism needed to avoid duplicates
 
-	There is no check that multiple instances are being run with
-	the same rig-name.  Some mechanism to control this is
-	desirable.  A simple mechanism that isn't prone to false
-	positives (i.e. not relying on lock files being deleted on
-	exit) needs to be developed.
+    g4wjs: There  is no  check that multiple  instances are  being run
+    	   with the same rig-name.  Some  mechanism to control this is
+    	   desirable.  A  simple mechanism  that isn't prone  to false
+    	   positives (i.e.  not relying on lock files being deleted on
+    	   exit) needs to be developed.
 
-	Implemented in v1.5. - Closed.
+    g4wjs: Implemented in v1.5. - Closed.
 
 Hamlib Omni VII - Bert w0rsb - Reports incomplete support
 
 Worked B4 - Dan k4shq - Incorrect country name occasionally
 
-       Also happened in v1.3.
+    g4wjs: Also happened in v1.3.
 
-       Asked for example.
+    g4wjs: Asked for example.
 
 CAT retries - George kf2t - Requests that 1 or 2 retries be made automatically
 
-    Requirement  comes  from  using  a FlexRadio  6700  which  briefly
-    interrupts the CAT connection when changing rig profiles. Suggests
-    a couple of automatic retries would be helpful.
+    g4wjs: Requirement comes from using a FlexRadio 6700 which briefly
+    	   interrupts   the   CAT   connection   when   changing   rig
+    	   profiles. Suggests  a couple of automatic  retries would be
+    	   helpful.
 
 Hamlib K3 - Bob n7rjn - Comms timeout error every 10-15 mins
 
-       Sent CAT trace version - awaiting log.
+    g4wjs: Sent CAT trace version - awaiting log.
 
-       Log  shows  incomplete  responses  to  CAT  commands  from  the
-       K3. Stop bits was set to 2,  K3 is 1 stop bit. Suggested trying
-       with 1 stop bit and if that  fails a lower baud rate - awaiting
-       log.
+    g4wjs: Log shows incomplete responses to CAT commands from the K3.
+    	   Stop bits was set to 2,  K3 is 1 stop bit. Suggested trying
+    	   with  1 stop  bit and  if that  fails a  lower baud  rate -
+    	   awaiting log.
 
-       Log with  1 stop bit is  much better but still  losing CAT data
-       around 50s. May  be CPU load related issue but  is happening in
-       both Tx and Rx periods which is hard to explain.
+    g4wjs: Log  with 1 stop  bit is much  better but still  losing CAT
+    	   around 50s. May be CPU  load related issue but is happening
+    	   in both Tx and Rx periods which is hard to explain.
 
-       n7rjn  is  using Mac  OS  X  10.9  Mavericks and  the  Timewave
-       Navigator he uses for interfacing  has a custom FTDI USB-serial
-       driver on Mac. This only has instructions for 10.7 & 10.8 so it
-       may not be compliant with 10.9. Informed n7rjn.
+    g4wjs: n7rjn  is using Mac  OS X  10.9 Mavericks and  the Timewave
+    	   Navigator  he  uses  for  interfacing  has  a  custom  FTDI
+    	   USB-serial driver  on Mac.  This only  has instructions for
+    	   10.7 & 10.8 so it may  not be compliant with 10.9. Informed
+    	   n7rjn.
 
-       Awaiting results of tests at lower CAT serial baud rate.
+    g4wjs: Awaiting results of tests at lower CAT serial baud rate.
 
-       This is looking like an issue  with the Elecraft P3 not passing
-       thru  all  CAT traffic  correctly.  n7rjn  has tested  for  1hr
-       without  P3 in  line without  error. Awaiting  results with  P3
-       upgraded to latest firmware.
+    g4wjs: This  is looking  like an  issue with  the Elecraft  P3 not
+    	   passing thru  all CAT traffic correctly.   n7rjn has tested
+    	   for 1hr without P3 in  line without error. Awaiting results
+    	   with P3 upgraded to latest firmware.
 
-       n7rjn updates  Elecraft P3 firmware  from 1.26 to 1.29  and the
-       issue appears to  be greatly improved but  successive "IF;" CAT
-       commands sometime  still cause the  second to only  respond ";"
-       and retries return nothing. So it seems the P3 (or possibly the
-       K3) still have an issue with CAT.
+    g4wjs: n7rjn  updates Elecraft P3  firmware from 1.26 to  1.29 and
+    	   the  issue appears  to be  greatly improved  but successive
+    	   "IF;" CAT commands sometime still  cause the second to only
+    	   respond ";" and retries return  nothing. So it seems the P3
+    	   (or possibly the K3) still have an issue with CAT.
 
-       n7rjn testing again without P3.
+    g4wjs: n7rjn testing again without P3.
 
-       Tests passed which seems to confirm that the latest P3 firmware
-       still has  a CAT pass through  issue. Bob will log  a case with
-       Elecraft.
+    g4wjs:  Tests passed  which seems  to confirm  that the  latest P3
+    	    firmware still has a CAT  pass through issue. Bob will log
+    	    a case with Elecraft.
 
-       Closed.
+    g4wjs: Closed.
 
-       P.S. differently  from first thougth,  the P3  can be set  to a
-       lower baud rate  than the K3 <->P3 fixed 38.4k  baud. This will
-       probably eliminate the issue. n7rjn is testing  at 19.2k baud.
+    g4wjs: P.S. differently from first thougth, the P3 can be set to a
+    	   lower baud  rate than the  K3 <->P3 fixed 38.4k  baud. This
+    	   will  probably eliminate  the issue.   n7rjn is  testing at
+    	   19.2k baud.
 
 Commander - Mike k2oi - Not connecting hostname lookup error
 
-	  This  may be  due  to the  "Network  Server" setting  having
-	  spaces in  it which causes  the hostname lookup  to override
-	  the default hostname.
+    g4wjs:  This may  be due  to the  "Network Server"  setting having
+    	   spaces in it  which causes the hostname  lookup to override
+    	   the default hostname.
 
-	  Changed to trim network query name (r4468).
+    g4wjs: Changed to trim network query name (r4468).
 
 Commander K3 - Joe w4tv - K3 not going to split
 
-	  This appears to  be because the K3 will not  switch to split
-	  unless the  mode of VFO B  ahs been preset to  match that of
-	  VFO A.
+    g4wjs: This appears to be because  the K3 will not switch to split
+    	   unless the mode  of VFO B ahs been preset  to match that of
+    	   VFO A.
 
-	  Joe has also offered to help with testing WSJT-X CAT issues.
+    g4wjs:  Joe has  also  offered  to help  with  testing WSJT-X  CAT
+    	   issues.
 
-	  Dave aa6yq is copied on discussions with Joe.
+    g4wjs: Dave aa6yq is copied on discussions with Joe.
 
 Commander IC7200 - John wa2hip - Occasionally not setting up split correctly
 
-	  I'm  not sure  exactly what  is not  set correctly  and have
-	  asked ws2hip to clarify.
+    g4wjs: I'm  not sure exactly  what is  not set correctly  and have
+    	   asked ws2hip to clarify.
 
 	  From wa2hip:
 	  ****************
@@ -372,62 +386,68 @@ Commander IC7200 - John wa2hip - Occasionally not setting up split correctly
 
 Hamlib IC7200 - John wa2hip - Occasional incorrect rig setting
 
-       Asked for clarification and sent a CAT trace version with
-       instructions to reproduce one issue for analysis - awaiting
-       log.
+    g4wjs:  Asked  for clarification  and  sent  a CAT  trace  version
+    	   instructions to reproduce one issue for analysis - awaiting
+    	   log.
 
 Log directory - several - Difficulty locating log files
 
-    A new  menu item to  open the log  directory in a  suitable system
-    application would seem to satisfy these issues.
+    g4wjs: A  new menu item  to open the  log directory in  a suitable
+    	   system application would seem to satisfy these issues.
 
-    Due  to the  number of  queries/requests around  locating the  log
-    files, this has  been added to the wsjtx-1.4. It  is a new feature
-    rather  than a  bug fix  but  since the  implementation is  fairly
-    trivial and easily tested it shouldn't cause regressions.
+    g4wjs: Due to  the number of queries/requests  around locating the
+    	   log files, this  has been added to the wsjtx-1.4.   It is a
+    	   new  feature   rather  than  a   bug  fix  but   since  the
+    	   implementation  is  fairly  trivial and  easily  tested  it
+    	   shouldn't cause regressions.
 
-    Completed r4470 - Closed.
+    g4wjs: Completed r4470 - Closed.
 
 Worked B4 - Peter oz1pif - Request option to use wsjtx.log as source
 
-       He  deletes  the ADIF  log  after  importing into  his  logging
-       application  so the  ADIF log  is  not suitable  for worked  B4
-       checking. OTOH the wsjtx.log is  left untouched as a backup and
-       would make a better database of worked calls.
+    g4wjs: He  deletes the ADIF  log after importing into  his logging
+    	   application so the  ADIF log is not suitable  for worked B4
+    	   checking. OTOH the wsjtx.log is  left untouched as a backup
+    	   and would make a better database of worked calls.
 
-       g4wjs: IMHO the  worked B4 would benefit from  using a database
-       for record  storage rather than  using a raw ADIF  format file.
-       Whether this  effort is  justified along with  the installation
-       complexities of  using a portable database  application is hard
-       to judge.  Given that JTAlert-X  is so competent at  doing this
-       job and more on Windows; maybe Laurie vk3ama might be persuaded
-       to  port his  application  to  Linux and  Mac  with bridges  to
-       logging suites available on those platforms.
+    g4wjs: IMHO the worked B4 would  benefit from using a database for
+    	   record storage  rather than using  a raw ADIF  format file.
+    	   Whether   this  effort   is   justified   along  with   the
+    	   installation  complexities  of  using a  portable  database
+    	   application is hard  to judge.  Given that  JTAlert-X is so
+    	   competent  at doing  this job  and more  on Windows;  maybe
+    	   Laurie vk3ama might be persuaded to port his application to
+    	   Linux and Mac  with bridges to logging  suites available on
+    	   those platforms.
 
 Settings dialog - Bob wd6dod - Widgets on Radio tab missing
 
-	 looks like the default and  minimum sizes for this window are
-	 too  small and  on  some systems  the  layout doesn't  render
-	 everything until the window is made larger.
+    g4wjs: looks  like the default  and minimum sizes for  this window
+    	   are too small and on some systems the layout doesn't render
+    	   everything until the window is made larger.
 
-	 Fixed in r4481. Closed.
+    g4wjs: Fixed in r4481. Closed.
 
 Hamlib IC-7800 - Dave g3red - Fails to initialize
 
-       Sent tracing version of RC2 - awaiting log.
+    g4wjs: Sent tracing version of RC2 - awaiting log.
 
 Virus detected - Bob kf5tpq - Vipre scanner detects trojan
 
-      This is  a false positive,  but for releases we  should validate
-      with a few of the on  line anti-virus validators and publish the
-      results and signatures alongside the releases.
+    g4wjs:  This is  a  false  positive, but  for  releases we  should
+    	   validate with  a few of  the on line  anti-virus validators
+    	   and  publish  the  results  and  signatures  alongside  the
+    	   releases.
 
-      Asked kf5tpq  if he  went ahead and  installed and  offered more
-      help if he is still unsure.
+    g4wjs: Asked  kf5tpq if  he went ahead  and installed  and offered
+    	   more help if he is still unsure.
 
-      Todo release process.
+    g4wjs: Todo release process.
 
 HRD FlexRadio-3000 (PowerSDR) - Johan ON3VNA - Illegal mode in init
 
-    Asked for HRD info file - awaiting.
+    g4wjs: Asked for HRD info file - awaiting.
 
+Log file - Albert kc8kjf - Callsign recorded as RRR
+
+    g4wjs: Asked for ALL.txt to see which exchange caused this.