diff --git a/issue-log.txt b/issue-log.txt index 5b7fcb3ef..028a8b68f 100644 --- a/issue-log.txt +++ b/issue-log.txt @@ -81,9 +81,14 @@ Commander TS-2000 - David wd4kpd - possibly the same issue awaiting feedback. Commander TS-2000 - Jim wb6dkh - Fake split +Hamlib IC-735 - Dieter dk6ov - Fake split not returning to correct QRG g4wjs: Leaving wrong QRG (Tx) current. Need trace for this issue. + g4wjs: dk6ov reports QRG not returning to Rx when leaving Tx for + both "Tune" and normal Tx periods. Also "Band" combo box + not being enabled after "Tune". + Flex 6000 (TS-2000 emulation) - George kf2t - fails to read QRG Flex 6700 - Ed k0kc - No CAT no PTT @@ -132,7 +137,18 @@ Hamlib FT-450 - Rudy ve3bdr - Protocol error while getting mode of split VFO g4wjs: May be fixed by r4434. I have asked Rudy to try again with Mode" set to "None". - g4wjs: Not fixed. Sent trace version of RC2, awaiting log. + g4wjs: Not fixed. Sent trace version of RC2. + + g4wjs: Log shows hamlib is not handling error responses from the + rig correctly. I have enhanced hamlib to handle "rig busy" + responses by retrying the command a few times. Built a + patched version and sent tracing variant to ve3bdr for + testing. + + g4wjs: Hamlib backend for this rig (shared by FT-9000, FT-950, + FT-5000 and, FT-2000) needs enhancement, it is missing + proper split mode, frequency and, enable + functions. Implementing. LXDE desktop Ubuntu - Craig wb3gck - No application menu bar @@ -179,9 +195,8 @@ Hamlib hermes (PowerSDR mRX) - Serge r6yy - Cat & PTT not working g4wjs: Fixed (mostly) r4434. - OmniRig TS-590S - Randy k5rhd - OmniRig server going -offline error OmniRig Omni VII - Bert w0rsb - OmniRig server going -offline error +OmniRig TS-590S - Randy k5rhd - OmniRig server going offline error +OmniRig Omni VII - Bert w0rsb - OmniRig server going offline error g4wjs: Issues with clearing the error. Probably the "Test CAT" not always able to start OmniRig client cleanly issue. @@ -205,6 +220,11 @@ Commander KX3 - Neil kb3tvu - occasionally stuck in TX after normal TX period Commander at the correct times. Asked kb3tvu to reproduce again with Commander tracing on also - awaiting logs. + g4wjs: kb3tvu reports that this issue in no longer reproducible + after a shack rearrangement. + + g4wjs: Closed. + Log files - Wayne m0way - Would like links on desktop to log files g4wjs: This is probably a good idea, I'm not sure that the desktop @@ -445,14 +465,32 @@ Virus detected - Bob kf5tpq - Vipre scanner detects trojan g4wjs: Todo release process. -HRD FlexRadio-3000 (PowerSDR) - Johan ON3VNA - Illegal mode in init +HRD FlexRadio-3000 (PowerSDR) - Johan on3vna - Illegal mode in init - g4wjs: Asked for HRD info file - awaiting. + g4wjs: Asked for HRD info file. + + g4wjs: Using PowerSDR HRD rig interface. Has removed buttons and + sliders from HRD UI to improve performance, need to check + if that limits TCP/IP server controls available. + + g4wjs: Removing controls from HRD UI also removes them from the + TCP/IP server. This is a PITA since any user can break the + interface by customizing their HRD UI and that is common + because removing sliders and buttons improves performance + :( + + g4wjs: Asked on3vna if he can provide "HRD Interface + Information.txt" for an un-customized HRD. He states he has + another machine which he will try and do that from - + awaiting data. Log file - Albert kc8kjf - Callsign recorded as RRR g4wjs: Asked for ALL.txt to see which exchange caused this. + iw3rab: Reports this is due to "MYCALL RRR 73" style free + messages. + Hamlib TS-990S - Charlie g4est - No direct support g4wjs: Needs new hamlib backend. @@ -468,3 +506,62 @@ Hamlib FTdx3000 - - No direct support g4wjs: Needs new hamlib backend. +OmniRig TS-2000 - Yanis sv2bbo - Initialization timeout + + g4wjs: Is using VPSE as serial splitter to cooperate with Kenwood + ARCP rig control program, have explained this is a invalid + configuration and will not be supported. + + g4wjs: Also using OmniRig as that is used with UR5EQF_Log 3 for + rig interface. Have explained that there is a known defect + that causes "Test CAT" to fail. Suggested he just click + "OK" to exit Settings. Also sent trace version - awaiting + log. + +Hamlib IC-817 - David wa1oui - Occasional hamlib errors + + g4wjs: Using OX X 10.9 with Timewave Navigator. Getting + intermittent "Hamlib error: Command rejected by the rig + while setting current VFO". Sent tracing version. + + g4wjs: Log shows rig doesn't respond to a CAT command at second 35 + a normal transmit period. Suggest investigating RFI issues. + + g4wjs: Suggested changes to Settings:- no flow control, no forced + DTR or RTS, 1 stop-bit and, use cu device rather than tty + device. After changes all seems to be working OK. + + g4wjs: Closed - user error. + + - Bjarne oz6dr - Operation below 200Hz + + g4wjs: This should probably be allowed when split mode is enabled. + +Hamlib FT-857D - Andrew zl3cc - Not setting Tx QRG for 1.5 - 2kHz segment + + g4wjs: Sent trace version. + + g4wjs: Log shows that when starting from MTUNE rather than on a + VFO is not handled correctly. zl3cc reports that the issue + doesn't arise when starting with a VFO rather than a memory + on the rig. + + g4wjs: This is only an issue if the user swaps VFO to check the Tx + QRG. Application works as designed if VFOs are not swapped + manually during a session. This is a quirk of the rig and + there is no obvious workaround other than not changing VFOs + manually. + + g4wjs: Closed - won't/can't fix. + +Halib TT Orion - Peter oz1pif - Split mismatch error + + g4wjs: Asked for CAT trace log. + + g4wjs: Issue is hamlib defect not detecting split correctly nor + setting split correctly either. Submitted patch to hamlib. + +Hamlib IC-7410 - Mike k6msm - "Hamlib error: Command rejected by the rig while setting current VFO" + + g4wjs: Sent tracing version - awaiting log. +