diff --git a/Darwin/ReadMe.txt b/Darwin/ReadMe.txt index 1eae7ee11..0deaf160f 100644 --- a/Darwin/ReadMe.txt +++ b/Darwin/ReadMe.txt @@ -1,74 +1,74 @@ - Notes on WSJT-X Installation for Mac OS X - ----------------------------------------- - -If you have already downloaded a previous version of WSJT-X then I suggest -you change the name in the Applications folder from WSJT-X to WSJT-X_previous -before proceeding. - -If you have installed a previous version of WSJT-X before then there is no -need to change anything on your system so proceed to NEXT. - -BEGIN: - -There are some system matters you must deal with first. Open a Terminal window -by going to Applications->Utilities and clicking on Terminal. - -Along with this ReadMe file there is a file: sysctl.conf. Drag this file to your Desktop. - -WSJT-X makes use of a block of memory which is shared between different parts of -the code. The normal allocation of shared memory on a Mac is insufficient and this -has to be increased. You can check the current allocation on your Mac by typing: - - sysctl -a | grep sysv.shm - + Notes on WSJT-X Installation for Mac OS X + ----------------------------------------- + +If you have already downloaded a previous version of WSJT-X then I suggest +you change the name in the Applications folder from WSJT-X to WSJT-X_previous +before proceeding. + +If you have installed a previous version of WSJT-X before then there is no +need to change anything on your system so proceed to NEXT. + +BEGIN: + +There are some system matters you must deal with first. Open a Terminal window +by going to Applications->Utilities and clicking on Terminal. + +Along with this ReadMe file there is a file: sysctl.conf. Drag this file to your Desktop. + +WSJT-X makes use of a block of memory which is shared between different parts of +the code. The normal allocation of shared memory on a Mac is insufficient and this +has to be increased. You can check the current allocation on your Mac by typing: + + sysctl -a | grep sysv.shm + If your shmmax is already at least 33554432 (32 MB) then you can close the Terminal -window and skip the next steps and go to (NEXT). - -You now have to increase the shared memory allocation. To view this file use TextEdit -to open sysctl.conf. - -This will show: - -kern.hostname=yourcomputername.local -kern.sysv.shmmax=33554432 -kern.sysv.shmmin=1 -kern.sysv.shmmni=128 -kern.sysv.shmseg=32 -kern.sysv.shmall=8192 - +window and skip the next steps and go to (NEXT). + +You now have to increase the shared memory allocation. To view this file use TextEdit +to open sysctl.conf. + +This will show: + +kern.hostname=yourcomputername.local +kern.sysv.shmmax=33554432 +kern.sysv.shmmin=1 +kern.sysv.shmmni=128 +kern.sysv.shmseg=32 +kern.sysv.shmall=8192 + You must now replace yourcomputername.local with the exact name of your computer. -To find this use the Terminal window and type: - - sysctl -a | grep hostname - +To find this use the Terminal window and type: + + sysctl -a | grep hostname + and will find your computer name. Now use TextEdit to replace yourcomputername.local in this file with the output from this command, including the .local at the end. Save -the file. - -Now move this file into place for the system to use by typing: (Note this assumes that -you really did drag this file to your Desktop as required earlier.) - - cd $HOME/Desktop +the file. + +Now move this file into place for the system to use by typing: (Note this assumes that +you really did drag this file to your Desktop as required earlier.) + + cd $HOME/Desktop sudo cp sysctl.conf /etc/ sudo chmod 664 /etc/sysctl.conf - sudo chown root:wheel /etc/sysctl.conf - -and then reboot your Mac. This is necessary to install the changes. After the -reboot you should re-open the Terminal window as before and you can check that the -change has been made by typing: - - sysctl -a | grep sysv.shm - -If shmmax is not shown as 33554432 then contact me since WSJT-X will fail to load with -an error message: "Unable to create shared memory segment". - -You are now finished with system changes. You should make certain that NO error messages -have been produced during these steps. You can now close the Terminal window. It will -not be necessary to repeat this procedure again, even when you download an updated -version of WSJT-X. - -NEXT: - + sudo chown root:wheel /etc/sysctl.conf + +and then reboot your Mac. This is necessary to install the changes. After the +reboot you should re-open the Terminal window as before and you can check that the +change has been made by typing: + + sysctl -a | grep sysv.shm + +If shmmax is not shown as 33554432 then contact me since WSJT-X will fail to load with +an error message: "Unable to create shared memory segment". + +You are now finished with system changes. You should make certain that NO error messages +have been produced during these steps. You can now close the Terminal window. It will +not be necessary to repeat this procedure again, even when you download an updated +version of WSJT-X. + +NEXT: + Drag the WSJT-X app to your preferred location, such as Applications. WSJT-X can utilise a closed source proprietary tool called KVASD to get the best @@ -82,30 +82,30 @@ functioning Internet connection since it downloads KVASD during the installation Run KVASD-installer and review the license terms then either drag the newly installed WSJT-X application onto it or use the "Choose target …" button to select the WSJT-X application you have just installed then; click "Install" to inject KVASD into the -WSJT-X application. - +WSJT-X application. + You need to configure your sound card. Visit Applications > Utilities > Audio MIDI Setup and select your sound card and then set Format to be "48000Hz 2ch-16bit" for -input and output. - +input and output. + Now double-click on the WSJT-X app and two windows will appear. Select Preferences under the WSJT-X Menu and fill in various station details on the General panel. I recommend checking the 4 boxes under the Display heading and the first 4 boxes under -the Behaviour heading. - +the Behaviour heading. + Next visit the Audio panel and select the Audio Codec you use to communicate between WSJT-X and your rig. There are so many audio interfaces available that it is not possible to give detailed advice on selection. If you have difficulties contact me. -Note the location of the Save Directory. Decoded wave forms are located here. - +Note the location of the Save Directory. Decoded wave forms are located here. + Look at the Reporting panel. If you check the "Prompt me" box, a logging panel will appear at the end of the QSO. Two log files are provided in Library/Application Support/WSJT-X. These are a simple wsjtx.log file and wsjtx_log.adi which is formatted for use with logging databases. If you are using Yosemite, the Library folder is hidden. Use Go on the Finder menu but hold down the alt key. Library will then appear in the list of folders. The "File" menu bar items include a button "Open log directory" to open the log directory in Finder -for you, ready for processing by any logging application you use. - +for you, ready for processing by any logging application you use. + Finally, visit the Radio panel. WSJT-X is most effective when operated with CAT control. You will need to install the relevant Mac driver for your rig. This must be located in the system driver directory /dev. I use a Prolific USB-Serial Adapter @@ -114,16 +114,16 @@ should install your driver and then re-launch WSJT-X. Return to the the Radio pa in Preferences and insert the full name of your driver in the Serial Port panel. Such as: /dev/tty.PL2303-00002226 or whatever driver you have. The /dev/ prefix is mandatory. Set the relevant communication parameters as required by your -transceiver. - +transceiver. + WSJT-X needs the Mac clock to be accurate. Visit System Preferences > Date & Time and make sure that date and time are set automatically. The drop-down menu will -normally offer you several time servers to choose from. - +normally offer you several time servers to choose from. + On the Help menu, have a look at the new Online User's Guide for operational hints -and tips. - -Please email me if you have problems. - ---- John G4KLA (g4kla@rmnjmn.demon.co.uk) - +and tips. + +Please email me if you have problems. + +--- John G4KLA (g4kla@rmnjmn.demon.co.uk) + diff --git a/Darwin/sysctl.conf b/Darwin/sysctl.conf index c8af385d5..48fd8bde5 100644 --- a/Darwin/sysctl.conf +++ b/Darwin/sysctl.conf @@ -1,7 +1,7 @@ -kern.hostname=yourcomputername.local -kern.sysv.shmmax=33554432 -kern.sysv.shmmin=1 -kern.sysv.shmmni=128 -kern.sysv.shmseg=32 -kern.sysv.shmall=8192 - +kern.hostname=yourcomputername.local +kern.sysv.shmmax=33554432 +kern.sysv.shmmin=1 +kern.sysv.shmmni=128 +kern.sysv.shmseg=32 +kern.sysv.shmall=8192 +