Steven Franke
1878685134
If file decdata is present in the data directory, then write detailed decoder data to file fst4_decodes.dat in the same directory.
2020-12-15 09:46:16 -06:00
Joe Taylor
3160e63dc7
Several minor tweaks to Q65 decoding.
2020-12-15 09:32:24 -05:00
Joe Taylor
99377e4c24
Measure avg and rms of estimated SNR values, for comparison with generated SNRs.
2020-12-15 09:31:29 -05:00
Steven Franke
2960adc557
FST4W: Use K=66 for first OSD decode attempt and for updating fst4w_calls.txt. Use K=50 for 2nd attempt.
2020-12-14 16:25:37 -06:00
Steven Franke
939e35bd26
More work on K=50 decoding.
2020-12-14 10:19:48 -06:00
Steven Franke
771e71bc84
Remove some debug prints.
2020-12-13 15:47:38 -06:00
Steven Franke
535c02d900
Implements decoding of FST4W messages as (240,50) crc-less codewords.
...
By cascading the full 24-bit crc generator matrix with the (240,74) LDPC code generator, create a (240,50) generator that is used to decode with approximately 1 dB better sensitivity than the (240,64) with 14-bit CRC approach that is normally used. This approach treats the CRC bits as additional parity bits and provides no means for identifying incorrect codewords. All codewords on the list generated by the OSD algorithm have CRCs that match the CRC of the message payload. Codewords are validated by unpacking the message and comparing the unpacked message with the list of stored callsign/grid pairs stored in the fst4w_calls.txt file.
2020-12-13 15:33:12 -06:00
Joe Taylor
2a25a188d1
Add IV3NWV to mainwindow title bar.
2020-12-11 09:13:38 -05:00
Joe Taylor
c4dbfbbdca
Must call wspr_config(false) when entering Q65 mode.
2020-12-09 13:55:47 -05:00
Joe Taylor
003aeedb91
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-12-09 13:55:17 -05:00
Joe Taylor
cd95df4089
Protect against pathological combinations of RxFreq and FTol.
2020-12-09 13:45:05 -05:00
Bill Somerville
5b60ddada1
Merge branch 'feat-fst280' into develop
2020-12-09 15:33:58 +00:00
Joe Taylor
5b59633b2f
Re-enable transmission in Q65 submodes B and higher.
2020-12-09 09:34:09 -05:00
Bill Somerville
aa7f8e0894
Merge branch 'release-2.3.0' into develop
2020-12-08 23:15:56 +00:00
Bill Somerville
ad04f4fbd2
Extra example log configuration file for rig control diagnostics
2020-12-08 23:14:46 +00:00
Joe Taylor
218d0bf359
Remove version number from the User Guide's title. (It's on the next line, anyway.)
2020-12-08 13:49:17 -05:00
Joe Taylor
84591fa2ef
Protect against a bounds error with very large FTol.
2020-12-08 11:53:22 -05:00
Bill Somerville
7e1b74ecc0
Moon distance in astronomical data window, tnx Charlie, G3WDG
2020-12-08 00:01:46 +00:00
Bill Somerville
0079b30b1a
Merge branch 'feat-fst280' into develop
2020-12-07 23:02:26 +00:00
Bill Somerville
9c0fe669d6
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-12-07 20:43:49 +00:00
Bill Somerville
c9f9c1d7c8
Merge branch 'develop' into feat-fst280
2020-12-07 20:43:28 +00:00
Bill Somerville
b8f9708eac
Merge branch 'release-2.3.0' into develop
2020-12-07 20:43:03 +00:00
Bill Somerville
60792182ad
Environment variables to set audio buffer sizes and fix Windows Rx timing
...
The two environment variables:
WSJT_RX_AUDIO_BUFFER_FRAMES
WSJT_TX_AUDIO_BUFFER_FRAMES
each can be defined to an integer number which will be used as the
suggested audio buffer size for Rx and Tx respectively. Not setting
the variable or setting it to zero or less will cause the default
buffer size to be used, which should be a good choice for most, if not
all, systems.
2020-12-07 20:34:56 +00:00
Bill Somerville
0410f4718f
Merge branch 'release-2.3.0' into develop
2020-12-07 10:44:52 +00:00
Bill Somerville
cefc8e2645
Use the system localized short date format for Log QSO dialog dates
...
This brings these fields into line with other QSO start and end
date/time fields elsewhere in the user interface. Note that time entry
and edit fields use a fixed hh:mm:ss 24-hour clock format consistent
with UTC usage and of suitable accuracy for logging QSOs.
2020-12-07 10:41:33 +00:00
Bill Somerville
e5686cb21f
Minor documentation clarification
2020-12-07 10:40:52 +00:00
Joe Taylor
d42363587e
Swtich from a fast mode to Q65 now closes FastGraph and opens WideGraph, as it should.
2020-12-06 21:42:30 -05:00
Bill Somerville
3d9a099fce
Reinstate changes that were reverted from commit df2daf6
...
Changes were moved aside to simplify a big merge commit with many
conflicts.
2020-12-07 00:18:52 +00:00
Bill Somerville
2964bc6295
Merge branch 'develop' into feat-fst280
2020-12-06 22:27:07 +00:00
Bill Somerville
f290cec93b
Revert "Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls."
...
This reverts commit df2daf60bda6ee68df9114666a10ed0a235782fc.
2020-12-06 17:51:06 +00:00
Joe Taylor
4b42937c35
Minor tweaks in q65_sync.
2020-12-06 08:12:58 -05:00
Joe Taylor
f948ba7c29
Allow fDop = 0.0 in test_q65.
2020-12-06 08:12:16 -05:00
Joe Taylor
a47f5e5103
Correct what appears to be an error in q65_intrinsics_fastfading: max hidx=63, not 64?
2020-12-06 08:09:28 -05:00
Joe Taylor
53f5e26580
First attempt ar reasonabkle values for nsmo and ibw range.
2020-12-05 13:46:44 -05:00
Joe Taylor
c50134691d
Adjustments to test_q65 for wider submodes.
2020-12-05 13:46:07 -05:00
Bill Somerville
06f9800b2f
Merge branch 'release-2.3.0' into develop
2020-12-05 18:43:00 +00:00
Joe Taylor
742e2ef59f
Fix pctile for larger arrays.
2020-12-05 11:09:27 -05:00
Joe Taylor
9f8336de4e
Code cleanup.
2020-12-05 11:09:15 -05:00
Joe Taylor
077811ae6d
Update q65params.f90.
2020-12-05 11:03:16 -05:00
Joe Taylor
6416777278
Set ':' as the "mode character" for Q65.
2020-12-04 15:55:03 -05:00
Joe Taylor
8b9b71c894
Fix the "off by one" issue in measuring f0 for list decodes.
2020-12-04 15:37:54 -05:00
Joe Taylor
3dd34e13ba
dd "MyCall DxCall DxGrid" to list. Set PLOG_MIN=-240. No list decoding if DxCall is not defined.
2020-12-04 15:29:46 -05:00
Joe Taylor
7500adce8b
Allow "@1500", etc., single-tone transmissions in Q65 mode.
2020-12-04 14:53:45 -05:00
Bill Somerville
538d0eedd5
Change to wide character logging and handle wide character file paths
2020-12-04 19:01:05 +00:00
Bill Somerville
f3a2c653aa
Revert to default o/s or Qt Tx audio buffer sizes
2020-12-04 18:59:41 +00:00
Joe Taylor
aaf832cbd2
Revert "Threshold in q65_sync.f90 increased to -250 only for reports. Assumes that the list is in the order defined in q65_set_list.f90 (reports are at indexes 5..56). Beware if q65_set_list is changed!!!"
...
This reverts commit bb08150e4bb61f4bfa14cbd80c56d6ab10476a9c.
2020-12-04 12:56:45 -05:00
Joe Taylor
978ea0f3b5
Revert "forgot to uncomment fort.55 output. corrected"
...
This reverts commit 72bc2572e6b2e706afd02b1e0edba26146ed240a.
2020-12-04 12:56:23 -05:00
Nico Palermo/IV3NWV
72bc2572e6
forgot to uncomment fort.55 output. corrected
2020-12-04 10:07:56 +01:00
Nico Palermo/IV3NWV
bb08150e4b
Threshold in q65_sync.f90 increased to -250 only for reports. Assumes that the list is in the order defined in q65_set_list.f90 (reports are at indexes 5..56). Beware if q65_set_list is changed!!!
2020-12-04 09:43:41 +01:00
Bill Somerville
9fed3534d8
Updated Japanese UI translation, tnx Oba san, JA7UDE
2020-12-03 23:39:44 +00:00
