Joe Taylor
15014685ac
Round-robin control should be visible only in FST240W mode.
2020-07-03 10:05:16 -04:00
Joe Taylor
b9e92c416f
Implement round-robin scheduling for FST240W mode.
2020-07-03 09:48:01 -04:00
Joe Taylor
5637b229a0
Correct the logic for initializing TRperiod everywhere in FST240W mode.
2020-07-02 16:54:16 -04:00
Joe Taylor
9f3bb0fbb7
Show option "Also FST240W" only in FST240 mode.
2020-07-02 16:20:18 -04:00
Joe Taylor
ab2371a96b
Correct the logic for generating "Type 2: messages in FST240W.
2020-07-02 14:57:46 -04:00
Joe Taylor
1a82b9b24d
Change the label for decoded text panel in FST240W mode.
2020-07-02 14:11:35 -04:00
Joe Taylor
8b2b1eb378
FST240W should always set RxFreq=1500 and FTol=100.
2020-07-02 14:03:00 -04:00
Joe Taylor
34055d331a
Send TRperiod to WideGraph when entering FST240 and FST240W modes.
2020-07-02 13:48:35 -04:00
Joe Taylor
352b497399
Remove a diagnostic print.
2020-07-02 13:43:50 -04:00
Joe Taylor
860224e890
Many changes to make FST240W behave in most ways like WSPR. Needs testing!
2020-07-02 09:39:11 -04:00
Joe Taylor
e63b04bb44
Post FSt240W decodes to PSK Reporter.
2020-07-01 15:46:17 -04:00
Joe Taylor
0608521751
Remove unused references to WSPR_LF.
2020-07-01 15:12:14 -04:00
Joe Taylor
eb1c60e454
Remove several more vestiges of WSPR-LF mode.
2020-07-01 13:17:07 -04:00
Joe Taylor
8903041aa9
Fix the startup value of TRperiod for FST240W mode.
2020-07-01 12:10:42 -04:00
Joe Taylor
f2c3cbf9ac
Implement basic functiionality of FST240W in the GUI.
2020-07-01 12:01:47 -04:00
Joe Taylor
ae54c80a54
Here's a start on GUI changes to support FST240W as well as FST240.
2020-06-30 17:14:58 -04:00
Joe Taylor
a44b240192
Change to NSPS=720 for 15-seconf FST240 modes, to allow use for EME.
2020-06-29 17:33:46 -04:00
Joe Taylor
ae6ca148bd
Pass mode name to the Modulator.
2020-06-29 14:47:46 -04:00
Joe Taylor
494481fa8a
Remove a poisonous but unused line of code.
2020-06-28 20:22:24 -04:00
Joe Taylor
7d094b36bf
Fix the "double-click on AP decode" crash.
2020-06-28 23:23:10 +01:00
Joe Taylor
1610375eee
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-06-28 16:27:23 -04:00
Joe Taylor
5b22280631
Fix the "double-click on AP decode" crash.
2020-06-28 16:26:22 -04:00
Bill Somerville
d5c5a58c7f
Merge branch 'develop' into feat-fst280
2020-06-27 22:14:09 +01:00
Joe Taylor
2b85c70bbc
Correct the m_hsymStop values for FST240-300.
2020-06-27 16:58:55 -04:00
Joe Taylor
51447ef1d3
Remove the 1 s offset in wave() array. Fix NSPS for 300 s periods.
2020-06-27 16:24:11 -04:00
Joe Taylor
eb167b11d3
Fix several more GUI parameters for FST240.
2020-06-27 14:13:59 -04:00
Joe Taylor
cd9146e646
Change a few more GUI parameters for the switch from FST280 to FST240. Tx timing probably still needs work.
2020-06-27 13:07:11 -04:00
Steven Franke
390884268c
Wholesale change from FST280 to FST240
2020-06-27 08:53:11 -05:00
Bill Somerville
4ee9ba6dba
Merge branch 'develop' into feat-wspr-user-hardware
2020-06-27 00:40:04 +01:00
phl0
6cbc91b653
Include prop mode in ADIF and UDP messages
2020-06-26 23:45:58 +01:00
Bill Somerville
27b4f2939a
More flexible execution of the user's hardware controller
...
Updated ways to implement a user defined hardware controller which is
executed just after band changes during WSPR band hopping operation.
Allows the user_hardware executable to be located in any directory on
the PATH environment variable. On Windows any file extension listed on
the PATHEXT environment variable may be used, the first match using
PATH and PATHEXT will be executed. On Windows this is achieved by
using CMD.EXE with a '/C' command line flag, i.e. the user's hardware
controller is executed like this:
CMD.EXE /C user_hardware nn
where 'nn' is the new band as an integer in meters.
On non-Windows systems the user's executable will be run if it is
found on the directories specified by the PATH environment variable,
and it is executable, i.e. it is equivalent to something like:
/bin/sh -c user_hardware nn
where 'nn' is the new band as an integer in meters.
In all cases the user_hardware controller should exit with a zero
status, otherwise it have been deemed to have failed. On Windows avoid
an exit status of one as that is utilized by CMD.EXE to indicate the
file was not found, which WSJT-X ignores silently.
This change means the prior need to put the user's hardware controller
into a WSJT-X installation directory like /usr/local/bin or
C:\WSJT\wsjtx\bin is no longer necessary.
2020-06-26 21:35:29 +01:00
Joe Taylor
9caf3b650c
Correct a number of parameters that control FST280 signal duration and timing.
2020-06-25 17:18:48 -04:00
Joe Taylor
1226aacaad
Remove the silly C++ puzzle, no longer needed.
2020-06-24 21:25:02 -04:00
Joe Taylor
b006d8381a
Code for a C++ puzzle.
2020-06-23 14:21:25 -04:00
Joe Taylor
04e326e75a
Change "Enable VHF/UHF/Microwave features" to "Enable VHF and submode features", and remove the popup warning about being on a lower band.
2020-06-22 15:20:41 -04:00
Joe Taylor
1f7d8545f3
Tx line to ALL.TXT should be trimmed().
2020-06-21 13:49:37 -04:00
Joe Taylor
956aa2dfc5
Call switch_mode() to repopulate bandComboBox after switching to FST280.
2020-06-21 11:27:30 -04:00
Joe Taylor
37b1b7aa6f
More of "Single Decode". Also, update m_mode in Wide Graph when switching to FST280.
2020-06-21 10:34:24 -04:00
Bill Somerville
b48b23450d
First iteration of optional TCP/IP client for PSK Reporter
2020-06-21 01:36:30 +01:00
Joe Taylor
f8d7489b4e
Fix many odds & ends for merging FST280 properly into the GUI.
2020-06-20 13:47:32 -04:00
Joe Taylor
87b79d0615
OK, we can now transmit in FST280 mode.
2020-06-19 15:02:05 -04:00
Joe Taylor
acd04cc050
Correctly restore FST280 submode on program restart.
2020-06-19 11:43:34 -04:00
Joe Taylor
a4e32807d9
Correct WSJT-X's display of UTC in FST280 decodes for TR < 60 s.
2020-06-19 09:59:12 -04:00
Joe Taylor
1cebbd2cdd
Enable decoding of FST280 for other T/R sequence lengths. Needs testing!
2020-06-17 19:28:44 -04:00
Joe Taylor
5aeaf5dc78
Include h=8 and NSS=40 in the FST280 decoder.
2020-06-17 14:17:03 -04:00
Joe Taylor
af9f7b21c0
Starting to implement FST280 decoder. Make Rx sequences behave as desired.
2020-06-17 10:56:18 -04:00
Joe Taylor
0e3ff2688a
Further progress toward activating FST280 and FST280W in the GUI.
2020-06-16 16:59:40 -04:00
Joe Taylor
4f802cae84
More work toward implementing GUI features for FST280 and FST280W.
2020-06-16 15:56:15 -04:00
Joe Taylor
725933ddca
Initial commit with some GUI features for FST280 and FS280W.
2020-06-16 14:58:08 -04:00
Bill Somerville
9c22b5c3ed
Qt v5.15 compatibility
2020-06-13 16:04:41 +01:00
