Joe Taylor
013c06b6ca
Fix a probmel with decoding FT4 from .wav files.
2019-04-03 09:25:32 -04:00
Joe Taylor
c8dae29425
Synchronized FT4 auto-sequencing now works.
2019-04-02 13:27:55 -04:00
Joe Taylor
181e5c7b9d
Remove unused code left over from asynchronous FT4 mode.
2019-04-02 13:16:06 -04:00
Joe Taylor
d579e5973e
Correct the size of saved FT4 .wav files.
2019-04-02 13:04:40 -04:00
Joe Taylor
fd239d9c07
Clean up some timing issues with time-synchronized FT4.
2019-04-02 11:39:28 -04:00
Joe Taylor
888b5fee28
Make "Tx 1st/Even" visible in FT4 mode.
2019-04-01 14:40:16 -04:00
Joe Taylor
e0d4c94cc1
Some very basic functionality for time-synchronized FT4.
2019-04-01 14:23:10 -04:00
Steve Franke
68308e23aa
FT8: Tx waveform will now change (after a short delay) if Tx message is changed after a transmission has started.
2019-03-29 15:30:50 -05:00
Joe Taylor
e3d4a1c3a6
FT4: double-click on a yellow Tx mesage causes re-sending that message.
2019-03-28 13:08:43 -04:00
Joe Taylor
e4ebddcf13
When Tx1 entry is disabled, Tx1 button should also be disabled.
2019-03-28 10:41:56 -04:00
Joe Taylor
1da4809e1b
Do not disable double-clicking when m_inQSOwith is populated. (Correct???)
2019-03-28 09:41:38 -04:00
Joe Taylor
e571349c69
In FT4 mode, let the Tx# buttons start a transmission.
2019-03-28 09:30:26 -04:00
Bill Somerville
760e7b1352
Disable expiration and associated nag message
2019-03-22 22:48:17 +00:00
Joe Taylor
665dbd0f78
With Alternate F1-F5 checked, let Ctrl+F1 send the message in Tx1.
2019-03-22 13:52:06 -04:00
Joe Taylor
e38091705b
In FT4 mode, let F11 and F12 move Tx freq by +/- 120 Hz.
2019-03-22 10:57:09 -04:00
Joe Taylor
974cf50e16
Red label (ui->labDXped) should disappear in FT4 modeif we leave all contest modes.
2019-03-22 09:24:52 -04:00
Joe Taylor
2f0ff14134
Enable NA_VHF contest messages in FT4 mode.
2019-03-22 08:49:22 -04:00
Joe Taylor
e2db793b5d
Don't save .wav files in FT4 mode unless SaveAll is checked.
2019-03-22 08:20:19 -04:00
Joe Taylor
212e4a3c07
Add a timeout message for what will become v2.1.0-rc1.
2019-03-21 12:36:38 -04:00
Joe Taylor
ffb6d3624f
In FT4 mode, display only "for us" and Tx messages in right window.
2019-03-21 09:33:37 -04:00
Joe Taylor
3a6e26d645
Clean up the FT4 logic for setting status of labDXped, cbAutoSeq, cbFirst.
2019-03-14 12:03:07 -04:00
Joe Taylor
6a2effcfc6
In FT4 mode, Tx4 is now hardwired to the 'RR73' message.
2019-03-13 13:59:41 -04:00
Joe Taylor
e150d003d6
Fix an inforrect constant in ft4_rx() that skipped over first 0.208 s of Rx data.
2019-03-13 10:31:23 -04:00
Joe Taylor
e9a999cda1
Use the "TU; ..." message when starting another FT4 QSO almost right away.
2019-03-12 11:09:49 -04:00
Steve Franke
7a0823301a
Remove some temporary code.
2019-03-09 10:03:01 -06:00
Joe Taylor
69675153a7
FT4 sequencing seems OK now (but needs thorough testing). No "TU;" msgs yet.
2019-03-07 14:36:58 -05:00
Joe Taylor
87826d1a6c
Clean up some FT4 code.
2019-03-07 11:21:17 -05:00
Joe Taylor
ff0b6a03a4
Merge branch 'feat-ft2' of bitbucket.org:k1jt/wsjtx into feat-ft2
2019-03-05 09:22:08 -05:00
Steve Franke
d7012267c0
CQ message type strings are now passed from mainwindow.cpp to ft4_decode.f90, to enable AP decoding of special CQ messages.
2019-03-04 17:10:57 -06:00
Joe Taylor
89cffbc959
Move the call to processMessage() to correct place in ft4Data().
2019-03-04 10:11:55 -05:00
Joe Taylor
871ff3892b
Use "CQ SCC ..." for Tx6 message if RTTY RU Exch = SCC.
2019-02-28 11:42:28 -05:00
Joe Taylor
6b5131ab5e
Trial changes to support messages for Slovenian Contest Club's RTTY-like contest.
2019-02-28 11:21:06 -05:00
Bill Somerville
278c544a6a
Merge branch 'develop' into feat-ft2
2019-02-26 11:52:14 +00:00
Steve Franke
fdca7c2dcb
Merge branch 'feat-ft2' of bitbucket.org:k1jt/wsjtx into feat-ft2
2019-02-25 15:03:55 -06:00
Steve Franke
3759198982
Remove ramp-up and ramp-down symbols. Instead, shape the first 1/8th of first and last real symbols.
2019-02-25 15:03:43 -06:00
Joe Taylor
fdfb655b06
Option to select "Low sidelobes" or "Most sensitive" for waterfall spectra.
2019-02-25 15:04:05 -05:00
Bill Somerville
ad75db3e06
Merge tag 'wsjtx-2.0.1' into develop
...
WSJT-X v2.0.1 GA release
2019-02-25 03:15:56 +00:00
Bill Somerville
c60fbc11b6
Fix samples CMake script and update NEWS and copyright dates
...
Preparation for v2.0.1 GA release.
2019-02-25 03:07:51 +00:00
Bill Somerville
a12e71f352
Merge branch 'master' into develop
2019-02-25 00:44:58 +00:00
Joe Taylor
25bfa3798a
Transmit FT8 using a gaussian-filtered waveform.
2019-02-22 13:39:39 -05:00
Joe Taylor
aeddaeab9e
FT4 now transmits a waveform generated from Gaussian-filtered frequency changes.
2019-02-21 12:10:27 -05:00
Joe Taylor
57a20f838f
Remove the code that builds an ADIF file from FoxQSO.txt.
2019-02-21 10:24:58 -05:00
Joe Taylor
d5a1671210
FT4 decoding interval is now 288 ms. Saving of FT4 files is somewhat rationalized.
2019-02-21 10:08:18 -05:00
Bill Somerville
fd7bca080a
Revert to direct Log QSO invocation rather than deferred for Fox logging
...
Deferring using a 0mS timer does not work for Fox logging as it may be
invoked more than once in a loop when multiple streams are
active. This change directly calls the logging member function(s)
inside the message processing loop.
This change was initially made because an unhelpful database query
order along with a need to display the latest logged QSO at the bottom
of the Fox log table view was causing GUI unresponsiveness when the
Fox log table had many rows. The current implementation shows the Fox
log table view in descending time order with the latest logged QSO at
the top which avoids this unresponsiveness issue (tested with a Fox
log table with over 15,000 rows).
2019-02-20 19:40:36 +00:00
Joe Taylor
f1e7b0c30a
Add (temporary?) code for converting FoxQSO.txt to an ADIF log.
2019-02-20 10:43:30 -05:00
Joe Taylor
c2cb55a68a
Reduce FT4 chunk size fro 500 to 288 ms; suppress duplicate decodes from close to chunk ends.
2019-02-13 14:42:57 -05:00
Bill Somerville
8a1ff9e1a3
Reset QSO start time when aborting a QSO or clearing messages (ESC and F4)
2019-02-13 18:47:31 +00:00
Steve Franke
cbfcb76193
AP decoding basically works. Make data_dir setting work on the Mac.
2019-02-07 18:48:38 -06:00
Steve Franke
71cb6d9f50
Use 4 different Costas arrays to prevent false syncs as received frames move
...
through the analysis window.
Add a random 77-bit vector to each message so that tone transitions occur
even if the message contains a long string of 0 or 1 (like a CQ).
Add alternative sync calculation as an option (sync2), for testing.
Add basic framework for AP decoding.
2019-02-05 19:18:50 -06:00
Bill Somerville
4dfc4685e9
Make the UDP protocol Clear (3) message two-way
...
External servers can clear either or both of the Band Activity and Rx
Frequency decodes windows. This was requested by Dave, AA6YQ, so that
DX Lab Suite applications can clear old decodes on band changes to
ensure that decode highlighing is consistent.
2019-02-03 00:49:35 +00:00
