mirror of
				https://github.com/saitohirga/WSJT-X.git
				synced 2025-10-31 13:10:19 -04:00 
			
		
		
		
	git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7273 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
		
			
				
	
	
		
			42 lines
		
	
	
		
			1.6 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			42 lines
		
	
	
		
			1.6 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
| image::settings-advanced.png[align="center",alt="Settings Advanced"]
 | |
| 
 | |
| _JT65 decoding parameters_ 
 | |
| 
 | |
| - *Random erasure patterns* logarithmically scales the number of
 | |
| pseudo-random trials used by the Franke-Taylor JT65 decoder.  Larger
 | |
| numbers give slightly better sensitivity but take longer.  For most
 | |
| purposes a good setting is 6 or 7.
 | |
| 
 | |
| - *Aggressive decoding level* sets the threshold for acceptable
 | |
| decodes using Deep Search.  Higher numbers will display results 
 | |
| with lower confidence levels.
 | |
| 
 | |
| - Check *MSK144 Contest Mode* to cause generation and auto-sequencing
 | |
| of MSK144 messages with four-character grid locators in place of signal
 | |
| reports.
 | |
| 
 | |
| - Check *Two-pass decoding* to enable a second decoding pass after
 | |
| signals producing first-pass decodes have been subtracted from the
 | |
| received data stream.
 | |
| 
 | |
| _Miscellaneous_
 | |
| 
 | |
| - Set a positive number in *Degrade S/N of .wav file* to add known
 | |
| amounts of pseudo-random noise to data read from a .wav file.  To
 | |
| ensure that the resulting S/N degradation is close to the requested
 | |
| number of dB, set *Receiver bandwidth* to your best estimate of the
 | |
| receiver's effective noise bandwidth.
 | |
| 
 | |
| - Set *Tx delay* to a number larger than the default 0.2 s to create
 | |
| a larger delay between execution of a command to enable PTT and onset
 | |
| of Tx audio.  
 | |
| 
 | |
| IMPORTANT: For the health of your T/R relays and external
 | |
| preamplifier, we strongly recommend using a hardware sequencer and
 | |
| testing to make sure that sequencing is correct.
 | |
| 
 | |
| - Check *x 2 Tone spacing* to generate Tx audio with twice the normal
 | |
| tone spacing.  This feature is intended for use with specialized LF/MF
 | |
| transmitters that divide the audio waveform by 2 before further
 | |
| processing.
 |